On Tue, Aug 31, 2010 at 2:28 PM, Mark F. Brown [off-list ref] wrote:

quoted

On Tue, Aug 31, 2010 at 12:53 AM, Haojian Zhuang
[off-list ref] wrote:

quoted

On Thu, Aug 26, 2010 at 5:18 PM, Mark F. Brown [off-list ref] wrote:

quoted

Signed-off-by: Mark F. Brown <redacted>
---
 arch/arm/mach-mmp/irq-pxa168.c |   23 ++++++++++++++++++++++-
 1 files changed, 22 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-mmp/irq-pxa168.c b/arch/arm/mach-mmp/irq-pxa168.c
index 52ff2f0..bfb0984 100644
--- a/arch/arm/mach-mmp/irq-pxa168.c
+++ b/arch/arm/mach-mmp/irq-pxa168.c

@@ -17,6 +17,8 @@

 #include <linux/io.h>

 #include <mach/regs-icu.h>
+#include <mach/regs-apmu.h>
+#include <mach/cputype.h>

 #include "common.h"

@@ -42,6 +44,19 @@ static struct irq_chip icu_irq_chip = {

       .unmask = icu_unmask_irq,
 };

+void handle_pxa168_keypad_irq(unsigned int irq, struct irq_desc *desc)
+{
+       uint32_t val;
+       uint32_t mask = APMU_PXA168_KP_WAKE_CLR;
+
+       /* clear keypad wake event */
+       val = __raw_readl(APMU_WAKE_CLR);
+       __raw_writel(val |  mask, APMU_WAKE_CLR);
+
+       /* handle irq */
+       handle_level_irq(irq, desc);
+}
+

Why should you clear wakeup event status in IRQ handler? If system is
resumed by keypad event, you should clear this wakeup source in resume
code. I think that IRQ code should not be binded with wakeup event at
here.

quoted

 void __init icu_init_irq(void)
 {
       int irq;

@@ -49,7 +64,13 @@ void __init icu_init_irq(void)

       for (irq = 0; irq < 64; irq++) {
               icu_mask_irq(irq);
               set_irq_chip(irq, &icu_irq_chip);
-               set_irq_handler(irq, handle_level_irq);
+
+               /* special handler for keypad */
+               if (cpu_is_pxa168() && irq == IRQ_PXA168_KEYPAD)
+                       set_irq_handler(irq, handle_pxa168_keypad_irq);
+               else
+                       set_irq_handler(irq, handle_level_irq);
+
               set_irq_flags(irq, IRQF_VALID);
       }
 }
--
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Haojian, this is an usual case, but without that clear wake event you
will not be able to clear the keypad interrupt. For my push to open
source I re-wrote the workaround code and added it as a special case
IRQ handler. In the Marvell pxa168 code base it is actually located in
the keypad interrupt handler as the function clear_wakeup(). I felt it
was better to isolate this code in the mmp common code base instead.

I'd rather the irq handler not being changed and use platform_data instead.
How about something below:

diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h

b/arch/arm/mach-mmp/include/mach/pxa168.h
index 27e1bc7..d2b7946 100644

--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h

@@ -5,6 +5,7 @@ struct sys_timer;

 extern struct sys_timer pxa168_timer;
 extern void __init pxa168_init_irq(void);
+extern void pxa168_clear_keypad_wakeup(void);

 #include <linux/i2c.h>
 #include <mach/devices.h>

@@ -97,4 +98,10 @@ static inline int pxa168_add_nand(struct

pxa3xx_nand_platform_data *info)
 {
       return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
 }
+
+static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *info)
+{
+       info->clear_wakeup = pxa168_clear_keypad_wakeup;
+       return pxa_register_device(&pxa168_device_keypad, info, sizeof(*info));
+}
 #endif /* __ASM_MACH_PXA168_H */

diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h

b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
index 7b4eadc..3a6bfe7 100644

--- a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h

@@ -52,6 +52,7 @@ struct pxa27x_keypad_platform_data {

       /* key debounce interval */
       unsigned int    debounce_interval;
+       void            (*clear_wakeup);
 };

 extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);

diff --git a/drivers/input/keyboard/pxa27x_keypad.c

b/drivers/input/keyboard/pxa27x_keypad.c
index f32404f..3fb94fe 100644

--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c

@@ -330,10 +330,20 @@ static void pxa27x_keypad_scan_direct(struct

pxa27x_keypad *keypad)
       keypad->direct_key_state = new_state;
 }

+static void clear_wakeup(struct pxa27x_keypad *keypad)
+{
+       struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+
+       if (pdata->clear_wakeup)
+               (pdata->clear_wakeup)();
+}
+
 static irqreturn_t pxa27x_keypad_irq_handler(int irq, void *dev_id)
 {
       struct pxa27x_keypad *keypad = dev_id;
-       unsigned long kpc = keypad_readl(KPC);
+       unsigned long kpc;
+
+       kpc = keypad_readl(KPC);

       if (kpc & KPC_DI)
               pxa27x_keypad_scan_direct(keypad);