On Mon, Mar 15, 2010 at 5:03 PM, Jiri Kosina [off-list ref] wrote:

On Sat, 27 Feb 2010, Ben Hardill wrote:

quoted

I've tried to follow the instructions in the README.keymap but when I
run /lib/udev/keymap -i input/eventX against both of the event devices I
get nothing out, not even the "unknown" message mentioned in the doc.

I'm not totally up to speed with this yet, but I think i may be down to the
"e0x0ffbc0000 HID usage page" that Wayne mentioned earlier not being read by
the input layer and passed to the udev layer. If this is the case then before
udev can be used to make hardware like this work the input layer will need to
add support for this page.

Could you guys please send me output from debugfs files for this
particular device?

Namely /sys/kernel/debug/hid/<device>/rdesc
/syse/kernel/debug/hid/<device>/events from the time the non-working
buttons are pressed?

Thanks,

--
Jiri Kosina
SUSE Labs, Novell Inc.

Jiri,
I have compiled kernel 2.6.33.1 with hid_debug set to 2.
Below is the output of the appropriate device (the remote presents
itself as two separate event devices) when pressing some of the
buttons in question.

I have attached the output of
/sys/kernel/debug/hid/0003:046E:5578.0004/rdesc as a text file since
it is so long, but here is the output of
/sys/kernel/debug/hid/0003:046E:5578.0004/events (one report for each
button pressed).

report (size 7) (numbered)



report (size 7) (numbered)



report (size 7) (numbered)



report (size 7) (numbered)



report (size 7) (numbered)



report (size 7) (numbered)


Cheers
Wayne