Hi,

On Thu, Feb 25, 2010 at 06:44:59PM +0530, Sriramakrishnan wrote:

This patch implements a simple Keypad driver that functions
as an I2C client. It handles key press events for keys
connected to TCA6416 I2C based IO expander.

what's wrong with gpio-keys ??

+ * Implementation based on drivers/input/keyboard/gpio_keys.c

I see,

shouldn't you instead provide a gpiolib driver for tca6416 and use the
generic gpio_keys driver ??

+	if (!chip->use_polling) {

IMO, you should only use polling if the irq line isn't connected.

+		if (pdata->irq_is_gpio)
+			chip->irqnum = gpio_to_irq(pdata->irqnum);

you can pass the irq number via i2c_board_info. Use it.

+		else
+			chip->irqnum = pdata->irqnum;
+
+		ret = request_irq(chip->irqnum, tca6416_keys_isr,

it's an i2c driver!!! this should be request_threaded_irq()

-- 
balbi