I tested this with a Bluetooth remote control.  As I understand, reports can be written to either the interrupt or control sockets.  I'm happy to test other changes to let this be selectable.

Brian

________________________________________
From: Bastien Nocera [hadess@hadess.net]
Sent: Tuesday, January 19, 2010 2:30 AM
To: Marcel Holtmann
Cc: Dmitry Torokhov; linux-input; BlueZ development; Gunn, Brian; Ping; Jiri Kosina
Subject: Re: [PATCHes] Implement Bluetooth Wacom tablet's mode change in the kernel

On Mon, 2010-01-18 at 23:29 -0800, Marcel Holtmann wrote:

Hi Bastien,

quoted

Here's a patch to do the Bluetooth Wacom tablet's mode setting in the
kernel. In the past, it was done in a patch in bluetootd.

The first patch is probably completely wrong. Right now,
hid_output_raw_report is done on the intr socket, instead of the ctrl
socket. If it's correct to do it on the intr socket, we'd need to add
some API as a way to select the ctrl socket instead for use in that
driver.

actually the interrupt should be incoming only. So moving the raw output
to the control channel seems fine to. Any reason why it is on the
interrupt channel in the first place?

The patch was written by Jiri and tested by Brian. Not sure what sort of
device Brian tested this with...