Thread (10 messages) 10 messages, 4 authors, 2009-12-01

Re: [PATCH v2 1/2] Input: Add device_enable handler to DaVinci Keyscan platform data

From: Miguel Aguilar <hidden>
Date: 2009-11-19 17:54:36

Dmitry Torokhov wrote:
On Thu, Nov 19, 2009 at 10:32:21AM -0600, Miguel Aguilar wrote:
quoted
Hi Dmitry,
quoted
quoted
 +	if (pdata->device_enable) {
+		error = pdata->device_enable(dev);
+		if (error < 0) {
+			dev_dbg(dev, "device enable function failed\n");
+			return error;
+		}
+	}
+
Hi Miguel,

Does this need to live in the driver? Why can't platform code do this
for us?

Thanks.
The reason to invoke the device_enable function in the driver is because 
in the testing process of the key scan driver a issue was found when the 
key scan is built as a module.

There is a specific PINMUX configuration that only should be set if the 
key scan driver is loaded in the kernel to avoid pin conflicts. So when 
the key scan is built as a module the board file (or platform code) 
doesn't know if the key scan is loaded or not, so that's why the driver 
is the one who must invoke the device_enable function in the probe 
function.
I see... What happens if PINMUX is set but there isn't a driver? Also,
what happens when you unload the module? Don't you need a similar call
to disable PINMUX configuration?
Dmitry,

If PINMUX is set and there isn't the driver, the PINMUX configuration can 
overwrite the PINMUX configuration needed by other drivers which actually are 
loaded. This situation happens in the DM365 EVM, because the hardware design 
there are hardware modules that can't coexist, so handling the PINMUX 
configuration calling a function pointer is a safe way to ensure that the PINMUX 
is set only when the module is loaded.

Disable PINMUX configuration doesn't make sense, because there isn't a thing 
such disable PINMUX configuration, there are a lot of possible PINMUX 
combinations, and there is no combination that means disable, and also change 
the PINMUX configuration to a different state would be risky.

Is the responsibility of the platform code or of the driver in the 
initialization, like in the case of the key scan, to set the needed PINMUX 
configuration for running the module properly.

Thanks,
Miguel Aguilar
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help