M Mike Frysinger #
Message details and related content
On Tue, Jul 14, 2009 at 14:03, Dmitry Torokhov wrote:
On Tue, Jul 14, 2009 at 01:33:46PM -0400, Mike Frysinger wrote:quoted
+static int ad7142_probe(struct i2c_client *client, + const struct i2c_device_id *id)__devinit
fixed
quoted
+ rc = request_irq(client->irq, ad7142_interrupt, + IRQF_TRIGGER_LOW, "ad7142_joystick", data);Let's use threaded IRQs, they are so nice for devices like this one.
i'll open a tracker item for someone to look at this ... Bryan has left our team
quoted
+ disable_irq_nosync(client->irq);Why nosync here?
no idea -- changed to normal version
quoted
+ /* Allocate and register AD7142 input device */ + data->input = input_allocate_device(); + if (!data->input) { + dev_err(&client->dev, "Can't allocate input device\n"); + rc = -ENOMEM; + goto fail_allocate; + }Allocate the device before you request IRQ.. Even if you disabled it there is still a window where it can be raised without input device allocated.
fixed ... sure would be nice to have a IRQF_xxx flag to request an IRQ
in the disabled state
quoted
+ input->evbit[0] = BIT_MASK(EV_KEY); + input->keybit[BIT_WORD(BTN_BASE)] = BIT_MASK(BTN_BASE) | + BIT_MASK(BTN_BASE2) | + BIT_MASK(BTN_BASE3) | + BIT_MASK(BTN_BASE4); + input->keybit[BIT_WORD(KEY_UP)] |= BIT_MASK(KEY_UP) | + BIT_MASK(KEY_DOWN) | + BIT_MASK(KEY_LEFT) | + BIT_MASK(KEY_RIGHT); +I am really not sure why you call it a joystick since it does not report relative axes... Let's put it in misc and just another button device.
if the hardware doesnt actually support relative events, sure ...
otherwise we'll add support for it
quoted
+static int __exit ad7142_remove(struct i2c_client *client)__devexit()
fixed
quoted
+ .remove = __exit_p(ad7142_remove),__devexit_p()
fixed
Any PM support?
guess we'll add it -mike _______________________________________________ Uclinux-dist-devel mailing list Uclinux-dist-devel@blackfin.uclinux.org https://blackfin.uclinux.org/mailman/listinfo/uclinux-dist-devel