Vojtech Pavlik escribió:

On Tue, Feb 05, 2008 at 12:18:15PM +0100, Javier Herrero wrote:

quoted

Dear Vojtech,

I think that a 1:1 mapping between linux keycodes and what keyboard sends 
is right, because the scan code to key code conversion is already 
programmed and done inside the FPGA code.

And the FPGA code changes with different keyboards attached?

The original OpenCores keyboard controller is a 6 rows x 12 cols 
keyboard controller that can be customized for other row/col sizes 
modifiying Constants.vhd VHDL file, in which also the translation table 
is defined, and for different key disposition schemes both the number of 
rows and cols can be changed. We are currently using this controller 
with a 4x4 key matrix, and with a different key mapping values, so I 
thought that it would be preferable to have the driver mapping fixed to 
1:1 and do the mapping in the VHDL, since in most cases the keyboard 
using this controller would be different to the default keyboard defined 
in the original Contants.vhd VHDL file.

Regards,

Javier

quoted

Best regards,

Javier

Vojtech Pavlik escribió:

quoted

On Thu, Jan 31, 2008 at 01:18:22AM +0800, Bryan Wu wrote:

quoted

+static irqreturn_t opencores_kbd_isr(int irq, void *dev_id)
+{
+	unsigned char c;
+	struct platform_device *pdev = dev_id;
+	struct opencores_kbd *opencores_kbd = platform_get_drvdata(pdev);
+	struct input_dev *input = opencores_kbd->input;
+
+	c = readb(opencores_kbd->addr_res->start);
+	input_report_key(input, c & 0x7f, c & 0x80 ? 0 : 1);
+	input_sync(input);
+
+	return IRQ_HANDLED;
+}

 This looks utterly wrong: It assumes 1:1 mapping between Linux keycodes
and what the keyboard sends, which I can't believe is the case.

-- 
------------------------------------------------------------------------
Javier Herrero                            EMAIL: jherrero@hvsistemas.com
HV Sistemas S.L.                          PHONE:         +34 949 336 806
Los Charcones, 17A                        FAX:           +34 949 336 792
19170 El Casar - Guadalajara - Spain      WEB: http://www.hvsistemas.com 

-- 
------------------------------------------------------------------------
Javier Herrero                            EMAIL: jherrero@hvsistemas.com
HV Sistemas S.L.                          PHONE:         +34 949 336 806
Los Charcones, 17A                        FAX:           +34 949 336 792
19170 El Casar - Guadalajara - Spain      WEB: http://www.hvsistemas.com