[PATCH v3 34/47] mfd: ti_am335x_tscadc: Introduce has_tsc
From: Miquel Raynal <miquel.raynal@bootlin.com>
Date: 2021-09-15 16:00:41
Also in:
linux-devicetree, linux-omap
Subsystem:
multifunction devices (mfd), the rest · Maintainers:
Lee Jones, Linus Torvalds
One way of knowing which hardware we are dealing with is to check its compatible. When this must be done at several places, it's best to use a proper boolean for that. ->has_tsc indicates if there is a touchscreen controller available (meaning it's a am33xx-like ADC) or not but does not indicate if it is actually used (that is the purpose of the use_tsc boolean in the probe). Introducing this boolean helps making a difference in the code between what is generic to both types of ADCs and what is specific to the am33xx hardware before introducing support for the am437x hardware. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> --- drivers/mfd/ti_am335x_tscadc.c | 37 +++++++++++++++++----------- include/linux/mfd/ti_am335x_tscadc.h | 1 + 2 files changed, 23 insertions(+), 15 deletions(-)
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index ab6c0e82d389..65c0fa735a71 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c@@ -105,8 +105,9 @@ static void tscadc_idle_config(struct ti_tscadc_dev *tscadc) { unsigned int idleconfig; - idleconfig = STEPCONFIG_YNN | STEPCONFIG_INM_ADCREFM | - STEPCONFIG_INP_ADCREFM | STEPCONFIG_YPN; + idleconfig = STEPCONFIG_INM_ADCREFM | STEPCONFIG_INP_ADCREFM; + if (tscadc->data->has_tsc) + idleconfig |= STEPCONFIG_YNN | STEPCONFIG_YPN; regmap_write(tscadc->regmap, REG_IDLECONFIG, idleconfig); }
@@ -140,12 +141,14 @@ static int ti_tscadc_probe(struct platform_device *pdev) tscadc->data = of_device_get_match_data(&pdev->dev); - node = of_get_child_by_name(pdev->dev.of_node, "tsc"); - of_property_read_u32(node, "ti,wires", &tscmag_wires); - of_property_read_u32(node, "ti,coordiante-readouts", &readouts); - of_node_put(node); - if (tscmag_wires) - use_tsc = true; + if (tscadc->data->has_tsc) { + node = of_get_child_by_name(pdev->dev.of_node, "tsc"); + of_property_read_u32(node, "ti,wires", &tscmag_wires); + of_property_read_u32(node, "ti,coordiante-readouts", &readouts); + of_node_put(node); + if (tscmag_wires) + use_tsc = true; + } node = of_get_child_by_name(pdev->dev.of_node, "adc"); of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
@@ -225,13 +228,16 @@ static int ti_tscadc_probe(struct platform_device *pdev) * of the CTRL register but not the subsystem enable bit which must be * added manually when timely. */ - tscadc->ctrl = CNTRLREG_TSC_STEPCONFIGWRT | CNTRLREG_STEPID; - if (use_tsc) { - tscadc->ctrl |= CNTRLREG_TSC_ENB; - if (tscmag_wires == 5) - tscadc->ctrl |= CNTRLREG_TSC_5WIRE; - else - tscadc->ctrl |= CNTRLREG_TSC_4WIRE; + tscadc->ctrl = CNTRLREG_STEPID; + if (tscadc->data->has_tsc) { + tscadc->ctrl |= CNTRLREG_TSC_STEPCONFIGWRT; + if (use_tsc) { + tscadc->ctrl |= CNTRLREG_TSC_ENB; + if (tscmag_wires == 5) + tscadc->ctrl |= CNTRLREG_TSC_5WIRE; + else + tscadc->ctrl |= CNTRLREG_TSC_4WIRE; + } } regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
@@ -327,6 +333,7 @@ static int __maybe_unused tscadc_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(tscadc_pm_ops, tscadc_suspend, tscadc_resume); static const struct ti_tscadc_data tscdata = { + .has_tsc = true, .name_tscmag = "TI-am335x-tsc", .compat_tscmag = "ti,am3359-tsc", .name_adc = "TI-am335x-adc",
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 26f3055635ac..467b3bec4335 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h@@ -140,6 +140,7 @@ #define TSCADC_CELLS 2 struct ti_tscadc_data { + bool has_tsc; char *name_tscmag; char *compat_tscmag; char *name_adc;
--
2.27.0