Re: [PATCHv2] ata: sata_dwc_460ex: preserve sactive_issued state across ISR invocations

Hello Rosen,

On Tue, Sep 08, 2026 at 02:45:36PM -0700, Rosen Penev wrote:

Zeroing hsdev->sactive_issued on every ISR entry destroys the NCQ tag
tracking that must persist across interrupts.  This field is populated
in the NEWFP (DMA Setup FIS) handler and used in subsequent DMAT (DMA
Transfer Complete) interrupts to determine which tags have completed
via the formula tag_mask = (sactive_issued | sactive) ^ sactive.

With the zeroing in place, sactive_issued is always cleared before a
DMAT interrupt can read it, so the NCQ completion path never identifies
completed tags correctly.  The command completion then falls back to
the non-NCQ path using ap->link.active_tag, which works for a single
outstanding command but produces wrong results when multiple NCQ tags
are in flight.

Remove the spurious zeroing and fix the NCQ/non-NCQ discrimination:
when tag_mask is zero but the active command is NCQ, all tracked tags
are still in SCR_ACTIVE and no completion processing is needed.

Fixes: 2d20da00c324b ("ata: sata_dwc_460ex: get rid of global data")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <redacted>

With all due respect, you've already said that you don't have any hardware
that uses the sata_dwc_460ex driver.

So you have not encountered a problem in the real world, and you have not
been able to test that your LLM-assisted patch solves that real world
problem.

The risk of accepting LLM-assisted patches for problems that no one has
been able to reproduce on real hardware, is that the fix itself might
introduce another problem, and then we just trade one problem for another.

AFAICT, this seems to have been the problem at least twice so far:
https://lore.kernel.org/linux-ide/anw-k62wK-GhkHSI@monoceros/ (local)
https://lore.kernel.org/linux-ide/20260908141538.731237-1-nik.borisov@suse.com/ (local)

It was years since I saw anyone with a Synopsys email contribute to their
PCIe controller driver, or their Ethernet controller drivers.

sata_dwc_460ex is an older DWC (Synopsys) SATA controller, newer DWC SATA
controllers are AHCI compliant and is using drivers/ata/ahci_dwc.c.

So that probably leaves us with the company who submitted this driver.
They don't seem to have sent anything since 2011, so I doubt that they
care about this driver either.

That said, we are happy to accept any patch for any driver for which you
actually have the hardware to test.


Kind regards,
Niklas