Hello!
On 5/16/23 1:59 PM, Niklas Schnelle wrote:
quoted hunk ↗ jump to hunk
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Acked-by: Damien Le Moal <redacted>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/ata/Kconfig | 28 ++++++++++++++--------------
drivers/ata/ata_generic.c | 2 ++
drivers/ata/libata-sff.c | 2 ++
include/linux/libata.h | 2 ++
4 files changed, 20 insertions(+), 14 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 42b51c9812a0..c521cdc51f8c 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
[...]
Shouldn't there be an entry for the ATIIXP driver here? It doesn't
call in*/out*() but it does call ata_bmdma_{start|stop}() that call
ioread*/iowrite*()...
And shouldn't there be an entry for APT867x driver too? It does call
ioread*/iowrite*()...
[...]
Shouldn't there be an entry for the HPT3x3 driver too? It does call
ioread*/iowrite*()... and also for the IT821x driver? And the Marvall
driver?
quoted hunk ↗ jump to hunk
@@ -819,7 +819,7 @@ config PATA_MPC52xx
config PATA_NETCELL
tristate "NETCELL Revolution RAID support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
Not clear why -- because it calls ata_pci_bmdma_clear_simplex()?
[...]
Shouldn't there be an entry for the NS87415 driver too? It does
call ioread*/iowrite*()...
[...]
quoted hunk ↗ jump to hunk
@@ -919,7 +919,7 @@ config PATA_SCH
config PATA_SERVERWORKS
tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
Not clear why -- because it calls ata_pci_bmdma_clear_simplex()?
[...]
Shouldn't there be an entry for the VIA driver too? It does call
ioread*/iowrite*()... and SiL680 driver too... and Winbond SL82C105
driver too... and OPTi PIO driver too... and PCMCIA driver too...
[...]
quoted hunk ↗ jump to hunk
@@ -1183,7 +1183,7 @@ config ATA_GENERIC
config PATA_LEGACY
tristate "Legacy ISA PATA support (Experimental)"
- depends on (ISA || PCI)
+ depends on (ISA || PCI) && HAS_IOPORT
select PATA_TIMINGS
Hm, won't it override the HAS_IOPORT dependency, if you enable
PATA_QDI or PATA_WINBOD_VLB?
quoted hunk ↗ jump to hunk
help
This option enables support for ISA/VLB/PCI bus legacy PATA
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 2f57ec00ab82..2d391d117f74 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
This driver calls ioread8() as well...
quoted hunk ↗ jump to hunk
@@ -197,8 +197,10 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
if (!(command & PCI_COMMAND_IO))
return -ENODEV;
+#ifdef CONFIG_PATA_ALI
This #ifdef doesn't make sense to me -- pata_ali.c will call
the below function anyway, no?
quoted hunk ↗ jump to hunk
if (dev->vendor == PCI_VENDOR_ID_AL)
ata_pci_bmdma_clear_simplex(dev);
+#endif /* CONFIG_PATA_ALI */
if (dev->vendor == PCI_VENDOR_ID_ATI) {
int rc = pcim_enable_device(dev);diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 9d28badfe41d..80137edb7ebf 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -3031,6 +3031,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
#ifdef CONFIG_PCI
+#ifdef CONFIG_HAS_IOPORT
/**
* ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex
* @pdev: PCI device
@@ -3056,6 +3057,7 @@ int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
return 0;
}
EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
+#endif /* CONFIG_HAS_IOPORT */
static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
{diff --git a/include/linux/libata.h b/include/linux/libata.h
index 311cd93377c7..90002d4a785b 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -2012,7 +2012,9 @@ extern int ata_bmdma_port_start(struct ata_port *ap);
extern int ata_bmdma_port_start32(struct ata_port *ap);
#ifdef CONFIG_PCI
+#ifdef CONFIG_HAS_IOPORT
extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
+#endif /* CONFIG_HAS_IOPORT */
Hm, wouldn't it be better if you used #else and declare an inline
variant of this function simply retirning an error?
[...]
MBR, Sergey