[PATCH 56/68] pata_serverworks: convert printk() calls
From: Hannes Reinecke <hare@suse.de>
Date: 2021-12-21 07:23:07
Subsystem:
libata subsystem (serial and parallel ata drivers), the rest · Maintainers:
Damien Le Moal, Niklas Cassel, Linus Torvalds
Convert printk() calls to structured logging. Signed-off-by: Hannes Reinecke <hare@suse.de> --- drivers/ata/pata_serverworks.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index b602e303fb54..e410fe44177f 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c@@ -286,13 +286,13 @@ static int serverworks_fixup_osb4(struct pci_dev *pdev) pci_read_config_dword(isa_dev, 0x64, ®); reg &= ~0x00002000; /* disable 600ns interrupt mask */ if (!(reg & 0x00004000)) - printk(KERN_DEBUG DRV_NAME ": UDMA not BIOS enabled.\n"); + dev_info(&pdev->dev, "UDMA not BIOS enabled.\n"); reg |= 0x00004000; /* enable UDMA/33 support */ pci_write_config_dword(isa_dev, 0x64, reg); pci_dev_put(isa_dev); return 0; } - printk(KERN_WARNING DRV_NAME ": Unable to find bridge.\n"); + dev_warn(&pdev->dev, "Unable to find bridge.\n"); return -ENODEV; }
--
2.29.2