On Wed, Mar 25, 2020 at 03:23:06PM +0100, LABBE Corentin wrote:

On Wed, Mar 25, 2020 at 02:00:25PM +0000, Jon Hunter wrote:

quoted

On 25/03/2020 13:40, LABBE Corentin wrote:

quoted

On Thu, Mar 19, 2020 at 08:55:38AM +0100, Nicolas Chauvet wrote:

quoted

Le jeu. 19 mars 2020 à 08:44, LABBE Corentin [off-list ref] a écrit :

quoted

Hello

sata doesnt work on tegra124-jetson-tk1 on next and master and at least since 5.2 (but 5.1 works).
[    0.492810] +5V_SATA: supplied by +5V_SYS
[    0.493230] +12V_SATA: supplied by +VDD_MUX
[    2.088675] tegra-ahci 70027000.sata: 70027000.sata supply ahci not found, using dummy regulator
[    2.097643] tegra-ahci 70027000.sata: 70027000.sata supply phy not found, using dummy regulator
[    3.314776] tegra-ahci 70027000.sata: 70027000.sata supply ahci not found, using dummy regulator
[    3.323658] tegra-ahci 70027000.sata: 70027000.sata supply phy not found, using dummy regulator
[    5.236964] tegra-ahci 70027000.sata: 70027000.sata supply ahci not found, using dummy regulator
[    5.245867] tegra-ahci 70027000.sata: 70027000.sata supply phy not found, using dummy regulator
[    5.254706] tegra-ahci 70027000.sata: 70027000.sata supply target not found, using dummy regulator
[    5.310270] phy phy-sata.6: phy poweron failed --> -110
[    5.315604] tegra-ahci 70027000.sata: failed to power on AHCI controller: -110
[    5.323022] tegra-ahci: probe of 70027000.sata failed with error -110
[   35.694269] +5V_SATA: disabling
[   35.697438] +12V_SATA: disabling

It looks strange, because (on same device) , I have sata working as
appropriate, but ethernet fails with me.
https://bugzilla.kernel.org/show_bug.cgi?id=206217

It might worth to have another report.

Hello

Mine has ethernet works well. But I hit many problem with it and older kernel.
Perhaps the 5.1.21, were I am stuck, does not have it.

Anyway, the tegra of kerneci has the same SATA problem.
https://storage.kernelci.org/next/master/next-20200325/arm/multi_v7_defconfig+CONFIG_SMP=n/gcc-8/lab-baylibre/boot-tegra124-jetson-tk1.txt

Maintainers, any idea on this sata issue ?

I have checked our bootlogs for v5.6-rc7 and don't see the issue with
either the tegra_defconfig or the multi_v7_defconfig. I am wondering if
this could be due a difference in the bootloader version. Currently we
are testing with a v2019.07 u-boot bootloader. Looks like the kernelci
board is using an older u-boot. Obviously it should still work, but
would be good to know if the reason why were are not seeing this is
because of the bootloader.

Another thing to check would be the pll_e clock frequency on a working
build and non-working build to see if there is a difference in the pll
frequency that is causing this.

Cheers
Jon

Hello

My uboot is 2016.01-rc4-00002-g3861d78, so a bit old.
I have a mainline uboot build for this tegra, but still didnt find a clear way to update it.
Did you have a good documentation on how to update it ?
If possible some clear uboot commands to update it via tftp.

Not sure about TFTP, but you can find the standard flashing scripts for
various devices here:

	https://github.com/NVIDIA/tegra-uboot-flasher-scripts

Those work by uploading the image via RCM and then running the commands
to flash it.

I think those scripts will also create the images that they will flash,
so you should be able to download that image via TFTP and then flash it
using the command that the tool would normally use.

Thierry