RE: [v4] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list

-----Original Message-----
From: Sergei Shtylyov <redacted>
Sent: 2019年1月25日 15:46
To: Peng Ma <redacted>; shawnguo@kernel.org; axboe@kernel.dk
Cc: robh+dt@kernel.org; mark.rutland@arm.com; Leo Li
[off-list ref]; linux-ide@vger.kernel.org; devicetree@vger.kernel.org;
linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; Andy Tang
[off-list ref]
Subject: Re: [v4] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list

Hello!

On 25.01.2019 6:32, Peng Ma wrote:

quoted

Add lxx2160a compatible to bindings documentation.

   lx2160a?

[Peng Ma] 
Yes, it is should be lx2160a, thanks very much.
I will change it as soon as possible.
Best Regards,
Peng

quoted

Signed-off-by: Peng Ma <redacted>
---
changed for V4:
	- add lx2160a compatible to bindings doc

  .../devicetree/bindings/ata/ahci-fsl-qoriq.txt     |    2 +-
  1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt

b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt

quoted

index 7c3ca0e..9ecc019 100644

--- a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt

@@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller
  Required properties:
    - reg: Physical base address and size of the controller's register area.
    - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
-    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc.
+    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a, lx2160a, etc.
    - clocks: Input clock specifier. Refer to common clock bindings.
    - interrupts: Interrupt specifier. Refer to interrupt binding.

MBR, Sergei

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel