[PATCH 1/7] dt-bindings: ata: rename brcm,sata-brcmstb.txt to brcm,sata-brcm.txt
From: Yendapally Reddy Dhananjaya Reddy <hidden>
Date: 2016-06-16 13:54:09
Also in:
linux-arm-kernel, linux-devicetree, lkml
Subsystem:
libata subsystem (serial and parallel ata drivers), open firmware and flattened device tree bindings, the rest · Maintainers:
Damien Le Moal, Niklas Cassel, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Renames the dt bindings document of Broadcom STB ahci driver to
common Broadcom ahci driver bindings document
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <redacted>
---
.../bindings/ata/{brcm,sata-brcmstb.txt => brcm,sata-brcm.txt} | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
rename Documentation/devicetree/bindings/ata/{brcm,sata-brcmstb.txt => brcm,sata-brcm.txt} (81%)
diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
similarity index 81%
rename from Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
rename to Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
index 6087283..126ee13 100644
--- a/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
+++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt@@ -1,13 +1,13 @@ -* Broadcom SATA3 AHCI Controller for STB +* Broadcom SATA3 AHCI Controller SATA nodes are defined to describe on-chip Serial ATA controllers. Each SATA controller should have its own node. Required properties: - compatible : should be one or more of - "brcm,bcm7425-ahci" - "brcm,bcm7445-ahci" - "brcm,sata3-ahci" + "brcm,bcm7425-ahci" + "brcm,bcm7445-ahci" + "brcm,sata3-ahci" - reg : register mappings for AHCI and SATA_TOP_CTRL - reg-names : "ahci" and "top-ctrl" - interrupts : interrupt mapping for SATA IRQ
--
2.1.0