On 02/02/2016 10:24 AM, Zubair Lutfullah Kakakhel wrote:

From: Aleksey Makarov <redacted>

The OCTEON SATA controller is currently found on cn71XX devices.

Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hans de Goede <redacted>
Signed-off-by: David Daney <redacted>
Signed-off-by: Vinita Gupta <redacted>
Signed-off-by: Aleksey Makarov <redacted>

Typically, someone sending a patch would append their own Signed-off-by:

I suggest that you do the same.  I think Documentation/SubmittingPatches 
section 11 talks about how to do this.

---
Changes in v6
- Rebase to v4.5-rc1
- Tested by Zubair Kakakhel on utm8 platform (CN7130 based)

Changes in v5:
- Sparse warnings are fixed
- Device tree docs are improved

Changes in v4:
- The call to dma_coerce_mask_and_coherent() was removed as suggested
   by Arnd Bergmann dma_mask and coherent_dma_mask are actually set
   in the ahci_platform_init_host() (libahci_platform.c)

Changes in v3:
- Rebased to v4.0-rc2
- Cosmetic changes

Changes in v2:
- The driver was rewritten as a driver for the UCTL SATA controller glue.
   It allowed to get rid of the most changes in ahci_platform.c
- Documentation for the device tree bindings was fixed.
---
  .../devicetree/bindings/ata/ahci-platform.txt      |   1 +
  .../devicetree/bindings/mips/cavium/sata-uctl.txt  |  42 ++++++
  drivers/ata/Kconfig                                |   9 ++
  drivers/ata/Makefile                               |   1 +
  drivers/ata/ahci_platform.c                        |   2 +
  drivers/ata/sata_octeon.c                          | 155 +++++++++++++++++++++
  6 files changed, 210 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/mips/cavium/sata-uctl.txt
  create mode 100644 drivers/ata/sata_octeon.c

[...]