[PATCH v2] libata: add support for NCQ commands for SG interface
From: <hidden>
Date: 2015-10-27 05:50:11
Also in:
lkml
Subsystem:
libata subsystem (serial and parallel ata drivers), the rest · Maintainers:
Damien Le Moal, Niklas Cassel, Linus Torvalds
From: Vinayak Kale <redacted> This patch is needed to make NCQ commands with FPDMA protocol value (eg READ/WRITE FPDMA) work over SCSI Generic (SG) interface. Signed-off-by: Vinayak Kale <redacted> --- Changes in v2: - Decoupled tf->flags changes in ata_scsi_pass_thru() from this patch as per Tejun's suggestion. A separate patch will be sent for that change. drivers/ata/libata-scsi.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 0d7f0da..c2af592 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c@@ -2914,12 +2914,14 @@ ata_scsi_map_proto(u8 byte1) case 5: /* PIO Data-out */ return ATA_PROT_PIO; + case 12: /* FPDMA */ + return ATA_PROT_NCQ; + case 0: /* Hard Reset */ case 1: /* SRST */ case 8: /* Device Diagnostic */ case 9: /* Device Reset */ case 7: /* DMA Queued */ - case 12: /* FPDMA */ case 15: /* Return Response Info */ default: /* Reserved */ break;
@@ -2992,6 +2994,10 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) tf->command = cdb[9]; } + /* For NCQ commands with FPDMA protocol, copy the tag value */ + if (tf->protocol == ATA_PROT_NCQ) + tf->nsect = qc->tag << 3; + /* enforce correct master/slave bit */ tf->device = dev->devno ? tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
--
1.9.1