[PATCH v6 2/2] phy: qcom: Add device tree bindings for IPQ806x SATA PHY
From: Kumar Gala <hidden>
Date: 2014-07-15 16:29:24
Also in:
linux-arm-kernel, linux-arm-msm, linux-devicetree, lkml
Subsystem:
arm/qualcomm mailing list, generic phy framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add binding spec for Qualcomm SoC PHYs, starting with the SATA PHY on the IPQ806x family of SoCs. Signed-off-by: Kumar Gala <redacted> --- v6: * Moved binding to qcom-ipq806x-sata-phy.txt instead of qcom-phy.txt .../bindings/phy/qcom-ipq806x-sata-phy.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt b/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt
new file mode 100644
index 0000000..76bfbd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt@@ -0,0 +1,23 @@ +Qualcomm IPQ806x SATA PHY Controller +------------------------------------ + +SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers. +Each SATA PHY controller should have its own node. + +Required properties: +- compatible: compatible list, contains "qcom,ipq806x-sata-phy" +- reg: offset and length of the SATA PHY register set; +- #phy-cells: must be zero +- clocks: must be exactly one entry +- clock-names: must be "cfg" + +Example: + sata_phy: sata-phy@1b400000 { + compatible = "qcom,ipq806x-sata-phy"; + reg = <0x1b400000 0x200>; + + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + + #phy-cells = <0>; + };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation