Thread (4 messages) 4 messages, 2 authors, 2011-06-13

Re: Power-up-in-standby Hitachi 5K3000 fails with either sata_sil24 or pmp, but not direct to AHCI controllers

From: Tim Small <hidden>
Date: 2011-06-10 16:15:56

On 10/06/11 11:25, Tejun Heo wrote:
On Thu, Jun 09, 2011 at 02:16:07PM +0100, Tim Small wrote:
  
quoted
... if I then didn't power down the drive, but instead attached it
to the Marvell controller, it didn't come back, so I'd guess the
interaction with the 3124 has wedged the drive permanently.
    
Heh, that's interesting.  The feature isn't very well tested and it
wouldn't be too surprising if there are some bugs on all sides
(driver, controller and drive firmware).  Can you please try with a
drive from a different vendor and see whether it fares any
differently?
  
OK, I'll see what I can get hold of in the way drives which support that
feature...

Cheers,

Tim.

-- 
South East Open Source Solutions Limited
Registered in England and Wales with company number 06134732.  
Registered Office: 2 Powell Gardens, Redhill, Surrey, RH1 1TQ
VAT number: 900 6633 53  http://seoss.co.uk/ +44-(0)1273-808309
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help