Mourad De Clerck wrote:

Hello,

I've got a box with an Asus M2V motherboard and a Marvell 6121 SATA
controller. Kernel version 2.6.30.

It works in general, but from time to time it stops detecting the disks
when I hotplug them. So usually hotplug works, but sometimes it just
stops working.

If I unload the ahci module, and reload it (with the marvell_enable=1
parm), it detects the disks again and works without any further issues -
until the next failed hotplug.

Is there anything that can be done about this?

In attachment, the kernel log with at the end (at [128508.539280]) a
failed hotplug, after which I unload/reload the ahci module and things
work again (starting at [147111.353555]).

[128508.539280] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen
[128508.539306] ata1: irq_stat 0x02400000, PHY RDY changed
[128508.539333] ata1: hard resetting link
[128514.300013] ata1: link is slow to respond, please be patient (ready=0)
[128518.556015] ata1: COMRESET failed (errno=-16)
[128518.556040] ata1: hard resetting link
[128524.320015] ata1: link is slow to respond, please be patient (ready=0)
[128528.576014] ata1: COMRESET failed (errno=-16)
[128528.576039] ata1: hard resetting link
[128534.340014] ata1: link is slow to respond, please be patient (ready=0)
[128563.628015] ata1: COMRESET failed (errno=-16)
[128563.628041] ata1: limiting SATA link speed to 1.5 Gbps
[128563.628062] ata1: hard resetting link
[128568.664014] ata1: COMRESET failed (errno=-16)
[128568.664038] ata1: reset failed, giving up
[128568.664059] ata1: EH complete

hmmmm.  Since PHY_RDY-leads-to-failure is a very rare report for this 
chip, my initial guess would be indicative of either a power, SATA port, 
or SATA cable problem.

PHY_RDY is essentially an indication of whether or not the host-device 
SATA connection is alive and transmitting SATA packets (FIS's).  If 
PHY_RDY changes, it means the hardware -thinks- that the SATA connection 
changed.

	Jeff