Re: ATA support for 4k sector size

quoted

quoted

quoted

quoted

"Ted" == Theodore Tso [off-list ref] writes:

quoted

Because of 63-sector legacy problems a bunch of ATA vendors will
initially ship 512/4096 drives that are not naturally aligned.
I.e. logical sector 63 will be aligned on a 4KB hardware sector
boundary to overcome the misaligned default partitioning.

Ted> Are we *sure* that this is what they plan to be doing?  

I have asked my contacts to verify.  That was the plan as of last
October.


Ted> Is there a way we can query the hardware to find out for sure what
Ted> drives are doing what?

Yep.  And with my patches the appropriate alignment is exposed in sysfs
for each block device.

Hardware workarounds for DOS partition table brain damage have existed
for a long time.  On a lot of RAID arrays you have to pick a LUN
personality.  And by choosing DOS/Windows/Linux you often align sector
63 to the internal RAID chunk size.

I'm working with several RAID vendors to make sure they set the right
alignment offset when they do that.  That isn't currently the case.  The
alignment knobs only recently made their appearance in the spec to
accommodate the 4KB sector transition.


Ted> I'll note that Vista starts all new partitions at the 1MB boundary,
Ted> so its filesystems will be naturally aligned.

Maybe.  See above.

-- 
Martin K. Petersen	Oracle Linux Engineering