Re: [PATCHSET #upstream-fixes] git tree available

Brian & Chamaigne Scamman wrote:

Tejun Heo wrote:

quoted

Can you please test whether the attached patch fixes the detection problem?

Tejun-
The patch worked great; see dmesg log below...
I didn't test the sslep(5) command since the patch worked; do you still need
me to test it?

Nope.

One remaining issue is the "failed to IDENTIFY (I/O error, err mask=0xll)"
message. If the PMP, bridges and drives are powered up before I insert the
eSATA cable in to the controller, I don't receive the message. The message
appears when only when I have the eSATA cable attached to the controller and
then simultaneously power on the PMP and drives. In the attached dmesg log,
the drive is eventually recognized; however there have been a couple of
times when the drives aren't recognized. An eSATA cable remove/re-insert
fixes the problem.

Hmm... can you please post the failing log?

-- 
tejun