Re: [patch 2.6.22-rc6] ATA: add a PCI ID for Intel Santa Rosa PATA controller

On Friday, 6. July 2007, Gaston, Jason D wrote:

quoted

quoted

quoted

On the other hand, we can leave it, because of a 

"off-by-one error" in ata_piix.c, 

quoted

quoted

do_pata_set_dmamode, line ~770:
[...]

Thanks,
Chr.

I quickly tried this patch on an ICH7-R system with an ATA133 Maxtor HD
and it did not seem to do anything bad.  I see no difference in function
or performance with the patch.

Jason

Thanks for testing, but you forgot some numbers. ;)
(bonnie++? hdparm -i && hdparm -t...)

Because, I don't think that Maxtor HD's mechanics is faster than 100MB/s.. 
The only thing that can keep up with > 100MB/s are the few MB of Cache on every HDD... 
(so, does anyone have a good idea to check the HDD's cache performance?
hdparm -t reads too much data) 

I came up with something like:
"dd if=/dev/sdX of=/dev/null bs=4M count=1 iflag=direct"

and run it 10 times in a row.

here's a test run with a SATA I WD2500YD-01N ( hdparm -t performance: ~57MB/s)
4194304 bytes (4.2 MB) copied, 0.0897687 seconds, 46.7 MB/s
4194304 bytes (4.2 MB) copied, 0.0776731 seconds, 54.0 MB/s
4194304 bytes (4.2 MB) copied, 0.0711224 seconds, 59.0 MB/s
4194304 bytes (4.2 MB) copied, 0.0679675 seconds, 61.7 MB/s
4194304 bytes (4.2 MB) copied, 0.0603272 seconds, 69.5 MB/s
4194304 bytes (4.2 MB) copied, 0.0543068 seconds, 77.2 MB/s
4194304 bytes (4.2 MB) copied, 0.0522881 seconds, 80.2 MB/s
4194304 bytes (4.2 MB) copied, 0.0520612 seconds, 80.6 MB/s
4194304 bytes (4.2 MB) copied, 0.0444805 seconds, 94.3 MB/s
4194304 bytes (4.2 MB) copied, 0.0338407 seconds, 124 MB/s
4194304 bytes (4.2 MB) copied, 0.0333174 seconds, 126 MB/s 

Thanks,
	Chr