On Wednesday 28 March 2007 09:04:28 Thomas Gleixner wrote:

On Tue, 2007-03-27 at 01:46 +0800, Jeff Chua wrote:

quoted

On 3/27/07, Thomas Gleixner [off-list ref] wrote:

quoted

quoted

It's related. I tested without CONFIG_HPET_TIMER, and now my X60 can
suspend and resume from RAM (s2ram). Even better, it works
with/without CONFIG_NO_HZ.

Does the patch below fix the HPET_TIMER=y case ?

Thomas, I tried, but it didn't help. Upon resume from ram, "date"
still didn't advance.

Can you please issue a SysRq-Q in this situation and provide the dmesg
output ?

Thanks,

	tglx


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Hi,
	I almost sure Iknow why this happens,
		The problem is that both hpet clock source and hpet clockevents doesn't have a suspend/resume function
		On resume we should enable the main counter _and_ enable legacy replacement mode,
		On my system main counter in enabled, by I think by bios, but legacy replacement mode is not, so if
		a system doesn't use lapic as a tick source, but use hpet+broadcast, it will hang for sure on resume, and i tested it

		The patch below is a temporally fix, until clock-events and clocksources will get proper suspend/resume hooks:

		Regards,
			Maxim Levitsky

---

Add suspend/resume for HPET
Signed-off-by: Maxim Levitsky <redacted>

---

diff --git a/arch/i386/kernel/hpet.c b/arch/i386/kernel/hpet.c
index 0fd9fba..a1ec79e 100644
--- a/arch/i386/kernel/hpet.c
+++ b/arch/i386/kernel/hpet.c

@@ -152,6 +152,16 @@ static void hpet_set_mode(enum clock_event_mode mode,
 	unsigned long cfg, cmp, now;
 	uint64_t delta;
 
+
+	if ( mode != CLOCK_EVT_MODE_UNUSED && mode != CLOCK_EVT_MODE_SHUTDOWN)
+	{
+		unsigned long cfg = hpet_readl(HPET_CFG);
+		cfg |= HPET_CFG_ENABLE | HPET_CFG_LEGACY;
+		hpet_writel(cfg, HPET_CFG);
+		
+	}
+		
+
 	switch(mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * hpet_clockevent.mult;