Re: [PATCH 2/3] atiixp.c: sb600 ide only has one channel

On 1/7/07, Bartlomiej Zolnierkiewicz [off-list ref] wrote:

On 1/6/07, Conke Hu [off-list ref] wrote:

quoted

AMD/ATI SB600 IDE/PATA controller only has one channel.

Signed-off-by: Conke Hu <redacted>

Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

[ but the patch is line wrapped ]

Hi Bart,
    Thank you!
    I've re-created the patch based on 2.6.20-rc4, pls see below.
    I've sent out 3 patches for the same file atiixp.c, pls apply it
after the [patch 1/3] :)
-------------------

--- linux-2.6.20-rc4/drivers/ide/pci/atiixp.c.2	2007-01-09

15:21:29.000000000 +0800

+++ linux-2.6.20-rc4/drivers/ide/pci/atiixp.c	2007-01-09

15:25:15.000000000 +0800

@@ -328,7 +328,14 @@ static ide_pci_device_t atiixp_pci_info[
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
 		.bootable	= ON_BOARD,
-	},
+	},{	/* 1 */
+		.name		= "SB600_PATA",
+		.init_hwif	= init_hwif_atiixp,
+		.channels	= 1,
+		.autodma	= AUTODMA,
+		.enablebits	= {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
+ 		.bootable	= ON_BOARD,
+ 	},
 };

 /**

@@ -349,7 +356,7 @@ static struct pci_device_id atiixp_pci_t
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE, PCI_ANY_ID,

PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
-	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 1},
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);