[PATCH 4/13] ATA ACPI: add params/docs.

@@ -82,6 +82,14 @@ int atapi_enabled = 0;
 module_param(atapi_enabled, int, 0444);
 MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
 
+int noacpi = 0;
+module_param(noacpi, int, 0444);
+MODULE_PARM_DESC(noacpi, "Disables use of ACPI in suspend/resume when set");
+
+int libata_printk = ATA_MSG_DRV;
+module_param_named(printk, libata_printk, int, 0644);
+MODULE_PARM_DESC(printk, "Set libata printk flags"); /* in linux/libata.h */
+
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("Library module for ATA devices");
 MODULE_LICENSE("GPL");

@@ -4545,6 +4553,8 @@ int ata_device_add(const struct ata_prob
 				(ap->mwdma_mask << ATA_SHIFT_MWDMA) |
 				(ap->pio_mask << ATA_SHIFT_PIO);
 
+		ap->msg_enable = libata_printk;
+
 		/* print per-port info to dmesg */
 		printk(KERN_INFO "ata%u: %cATA max %s cmd 0x%lX ctl 0x%lX "
 				 "bmdma 0x%lX irq %lu\n",
--- linux-2616-rc4-ata.orig/Documentation/kernel-parameters.txt
+++ linux-2616-rc4-ata/Documentation/kernel-parameters.txt

@@ -41,6 +41,7 @@ restrictions referred to are that the re
 	ISAPNP	ISA PnP code is enabled.
 	ISDN	Appropriate ISDN support is enabled.
 	JOY	Appropriate joystick support is enabled.
+	LIBATA	libata driver is enabled.
 	LP	Printer support is enabled.
 	LOOP	Loopback device support is enabled.
 	M68k	M68k architecture is enabled.

@@ -242,6 +243,9 @@ running once the system is up.
 
 	ataflop=	[HW,M68k]
 
+	atapi_enabled=	[LIBATA] Enable discovery & support of ATAPI devices
+			Format: <value> (0=off, 1=on)
+
 	atarimouse=	[HW,MOUSE] Atari Mouse
 
 	atascsi=	[HW,SCSI] Atari SCSI

@@ -981,6 +985,10 @@ running once the system is up.
 			emulation library even if a 387 maths coprocessor
 			is present.
 
+	noacpi=		[LIBATA] Disables use of ACPI in libata suspend/resume
+			when set.
+			Format: <int>
+
 	noalign		[KNL,ARM]
 
 	noapic		[SMP,APIC] Tells the kernel to not make use of any

@@ -1227,6 +1235,11 @@ running once the system is up.
 			autoconfiguration.
 			Ranges are in pairs (memory base and size).
 
+	printk=		[LIBATA] Set libata printk level (mask).
+			The values are defined in include/linux/libata.h.
+			The default value is 1 (ATA_MSG_DRV).
+			Format: <int>
+
 	profile=	[KNL] Enable kernel profiling via /proc/profile
 			Format: [schedule,]<number>
 			Param: "schedule" - profile schedule points.
--- linux-2616-rc4-ata.orig/drivers/scsi/libata-acpi.c
+++ linux-2616-rc4-ata/drivers/scsi/libata-acpi.c

@@ -212,6 +212,9 @@ int ata_acpi_push_id(struct ata_port *ap
 	struct acpi_object_list		input;
 	union acpi_object 		in_params[1];
 
+	if (noacpi)
+		return 0;
+
 	if (ata_msg_probe(ap))
 		printk(KERN_DEBUG
 			"%s: ap->id: %d, ix = %d, port#: %d, hard_port#: %d\n",

@@ -319,6 +322,9 @@ int do_drive_get_GTF(struct ata_port *ap
 	*gtf_length = 0;
 	*gtf_address = 0UL;
 
+	if (noacpi)
+		return 0;
+
 	if (!ata_dev_present(atadev) ||
 	    (ap->flags & ATA_FLAG_PORT_DISABLED)) {
 		if (ata_msg_probe(ap))

@@ -493,6 +499,9 @@ int do_drive_set_taskfiles(struct ata_po
 			__FUNCTION__, ap->id,
 			ap->port_no, ap->hard_port_no);
 
+	if (noacpi)
+		return 0;
+
 	if (!ata_dev_present(atadev) ||
 	    (ap->flags & ATA_FLAG_PORT_DISABLED))
 		goto out;

@@ -540,6 +549,9 @@ int ata_acpi_exec_tfs(struct ata_port *a
 	if (ata_msg_probe(ap))
 		printk(KERN_DEBUG "%s: ENTER:\n", __FUNCTION__);
 
+	if (noacpi)
+		return 0;
+
 	for (ix = 0; ix < ATA_MAX_DEVICES; ix++) {
 		printk(KERN_DEBUG "%s: call get_GTF, ix=%d\n",
 			__FUNCTION__, ix);
--- linux-2616-rc4-ata.orig/drivers/scsi/libata.h
+++ linux-2616-rc4-ata/drivers/scsi/libata.h

@@ -41,6 +41,8 @@ struct ata_scsi_args {
 
 /* libata-core.c */
 extern int atapi_enabled;
+extern int noacpi;
+extern int libata_printk;
 extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
 				      struct ata_device *dev);
 extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc);