On Mer, 2005-09-21 at 20:29 +0100, Russell King wrote:

Last time I checked, with CF cards the media was an inherent part of
the CF card and is not changable without removing the card, opening
it, getting out the soldering iron... or alternatively plugging in
a different CF card.

Last time I checked the spinning platter on my hard disk wasn't
removable without an axe either. What is your point ?

Of course, PCMCIA will detect removal of the CF card provided the
PCMCIA hardware is working.  PCMCIA will also detect a CF card which
has been changed while the system has been suspended _provided_ the
CIS does not match the previous cards CIS.  It'll even do this if
you use cardctl suspend/cardctl resume.

Most adapters do not do this. It works solely because we set
drive->removable so we force a new partition scan.

It sounds like you know of a case where this isn't true - maybe a bug
report.  Can you expand on it?

With drive->removable = 0 if I insert a card I get partition tables, it
will then not rescan that in future even if the card changed, because
there is no "media change detect" line, unlike on a floppy.

If I pull the CF adapter out it is fine because you get pcmcia level
hotplug but that is not neccessary for card changing on better designed
adapters or when the CF adapter is on the board itself with a CF slot
exposed to the user.

SCSI also treats CF cards as removable for the same reason.


Alan