[PATCH v2 09/10] riscv: dts: ultrarisc: Add Shenzhen Rongda M0 board device tree

@@ -12,3 +12,4 @@ subdir-y += spacemit
 subdir-y += starfive
 subdir-y += tenstorrent
 subdir-y += thead
+subdir-y += ultrarisc

@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ULTRARISC) += dp1000-shenrongda-m0.dtb

@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2026 UltraRISC Technology (Shanghai) Co., Ltd.
+ */
+
+#ifndef _DP1000_PINCTRL_H
+#define _DP1000_PINCTRL_H
+
+#define PA0		0
+#define PA1		1
+#define PA2		2
+#define PA3		3
+#define PA4		4
+#define PA5		5
+#define PA6		6
+#define PA7		7
+#define PA8		8
+#define PA9		9
+#define PA10		10
+#define PA11		11
+#define PA12		12
+#define PA13		13
+#define PA14		14
+#define PA15		15
+#define PB0		16
+#define PB1		17
+#define PB2		18
+#define PB3		19
+#define PB4		20
+#define PB5		21
+#define PB6		22
+#define PB7		23
+#define PC0		24
+#define PC1		25
+#define PC2		26
+#define PC3		27
+#define PC4		28
+#define PC5		29
+#define PC6		30
+#define PC7		31
+#define PD0		32
+#define PD1		33
+#define PD2		34
+#define PD3		35
+#define PD4		36
+#define PD5		37
+#define PD6		38
+#define PD7		39
+#define LPC0		40
+#define LPC1		41
+#define LPC2		42
+#define LPC3		43
+#define LPC4		44
+#define LPC5		45
+#define LPC6		46
+#define LPC7		47
+#define LPC8		48
+#define LPC9		49
+#define LPC10		50
+#define LPC11		51
+#define LPC12		52
+
+#endif /* _DP1000_PINCTRL_H */

@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright(C) 2026 UltraRISC Technology (Shanghai) Co., Ltd.
+ */
+
+#include "dp1000.dtsi"
+#include "dp1000-pinctrl.h"
+
+&pinctrl {
+	i2c0_pins: i2c0-pins {
+		pins = <PA12 PA13>;
+		function = "i2c";
+		bias-pull-up;
+		drive-strength = <33>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins = <PB6 PB7>;
+		function = "i2c";
+		bias-pull-up;
+		drive-strength = <33>;
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins = <PC0 PC1>;
+		function = "i2c";
+		bias-pull-up;
+		drive-strength = <33>;
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins = <PC2 PC3>;
+		function = "i2c";
+		bias-pull-up;
+		drive-strength = <33>;
+	};
+
+	spi0_pins: spi0-pins {
+		pins = <PD0 PD1 PD2 PD3 PD4 PD5 PD6 PD7>;
+		function = "spi";
+		bias-pull-up;
+		drive-strength = <33>;
+	};
+
+	spi1_pins: spi1-pins {
+		pins = <PA0 PA1 PA2 PA3>;
+		function = "spi";
+		bias-pull-up;
+		drive-strength = <33>;
+	};
+
+	uart0_pins: uart0-pins {
+		pins = <PA8 PA9>;
+		function = "uart";
+		bias-pull-up;
+		drive-strength = <33>;
+	};
+
+	uart1_pins: uart1-pins {
+		pins = <PB4 PB5>;
+		function = "uart";
+		bias-pull-up;
+		drive-strength = <33>;
+	};
+
+	uart2_pins: uart2-pins {
+		pins = <PC4 PC5>;
+		function = "uart";
+		bias-pull-up;
+		drive-strength = <33>;
+	};
+
+	uart3_pins: uart3-pins {
+		pins = <PC6 PC7>;
+		function = "uart";
+		bias-pull-up;
+		drive-strength = <33>;
+	};
+};

@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright(C) 2026 UltraRISC Technology (Shanghai) Co., Ltd.
+ */
+
+#include "dp1000-shenrongda-m0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Shenzhen Rongda M0 Board";
+	compatible = "shenrongda,m0", "ultrarisc,dp1000";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	rtc@32 {
+		compatible = "whwave,sd3078";
+		reg = <0x32>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+};
+
+&spi1 {
+	num-cs = <1>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&pcie_x16 {
+	status = "okay";
+};
+
+&pcie_x4a {
+	status = "okay";
+};
+
+&pcie_x4b {
+	status = "okay";
+};
+
+&ethernet {
+	phy-handle = <&phy0>;
+	/*
+	 * The PCB does not add RGMII TX or RX clock delays. The DP1000
+	 * integration adds fixed delays in both directions.
+	 */
+	phy-mode = "rgmii-id";
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: phy@0 {
+			reg = <0>;
+		};
+	};
+};