[PATCH v3 3/4] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
From: Chris Packham <chris.packham@alliedtelesis.co.nz>
Date: 2021-05-11 21:21:07
Also in:
linux-devicetree, linuxppc-dev, lkml
Subsystem:
linux for powerpc (32-bit and 64-bit), the rest · Maintainers:
Madhavan Srinivasan, Michael Ellerman, Linus Torvalds
The i2c controllers on the P1010 have an erratum where the documented
scheme for i2c bus recovery will not work (A-004447). A different
mechanism is needed which is documented in the P1010 Chip Errata Rev L.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
Notes:
Changes in v3:
- New
arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
index c2717f31925a..ccda0a91abf0 100644
--- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi@@ -122,7 +122,15 @@ memory-controller@2000 { }; /include/ "pq3-i2c-0.dtsi" + i2c@3000 { + fsl,i2c-erratum-a004447; + }; + /include/ "pq3-i2c-1.dtsi" + i2c@3100 { + fsl,i2c-erratum-a004447; + }; + /include/ "pq3-duart-0.dtsi" /include/ "pq3-espi-0.dtsi" spi0: spi@7000 {
--
2.31.1