[PATCH v3 6/6] MIPS: dts: mscc: enable i2c on ocelot_pcb123
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
Date: 2018-08-06 18:54:23
Also in:
linux-devicetree, linux-mips, lkml
Subsystem:
microsemi mips socs, mips, the rest · Maintainers:
Alexandre Belloni, Thomas Bogendoerfer, Linus Torvalds
Enable the i2c controller on ocelot PCB123. While there are no i2c devices on the board itself, it can be used to control the SFP transceivers. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
index 4ccd65379059..336c859a9bbe 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts@@ -26,6 +26,12 @@ status = "okay"; }; +&i2c { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + status = "okay"; +}; + &mdio0 { status = "okay"; };
--
2.18.0