Re: [PATCH v5 3/6] Documentation: Add sbs-manager device tree node documentation
From: Rob Herring <robh@kernel.org>
Date: 2016-09-23 19:44:34
Also in:
linux-devicetree, linux-pm
On Wed, Sep 21, 2016 at 04:41:11PM +0800, Phil Reid wrote:
quoted hunk ↗ jump to hunk
From: Karl-Heinz Schneider <redacted> This patch adds device tree documentation for the sbs-manager Reviewed-by: Phil Reid <redacted> Signed-off-by: Karl-Heinz Schneider <redacted> Signed-off-by: Phil Reid <redacted> --- .../bindings/power/supply/sbs,sbs-manager.txt | 62 ++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txtdiff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt new file mode 100644 index 0000000..2a04b30 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt@@ -0,0 +1,62 @@ +Binding for sbs-manager + +Required properties: +- compatible: should be "lltc,ltc1760" or use "sbs,sbs-manager" as fallback. +- reg: integer, i2c address of the device. Should be <0xa>. +Optional properties: +- gpio-controller: Marks the port as GPIO controller. + See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. +- #gpio-cells: Should be <2>. The first cell is the pin number, the second cell + is used to specify optional parameters: + See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
Is this leftover from the last version? It doesn't look like you are using any GPIOs in the example.
+
+From OS view the device is basically an i2c-mux used to communicate with up to
+four smart battery devices at address 0xb. The driver actually implements this
+behaviour. So standard i2c-mux nodes can be used to register up to four slave
+batteries. See Documentation/devicetree/bindings/i2c/i2c-mux.txt for more
+information on i2c-mux nodes. Channels will be numerated starting from 1 to 4.
+
+Example:
+
+batman@0a {
+ compatible = "lltc,ltc1760";
+ reg = <0x0a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ battery@b {
+ compatible = "ti,bq2060", "sbs,sbs-battery";
+ reg = <0xb>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ battery@b {
+ compatible = "ti,bq2060", "sbs,sbs-battery";
+ reg = <0xb>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ battery@b {
+ compatible = "ti,bq2060", "sbs,sbs-battery";
+ reg = <0xb>;
+ };
+ };
+};
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html