July 2014

211 messages across 96 threads.

LastThreadReplies
Thursday 31 July
[PATCH v5 0/2] i2c: add DMA support for freescale i2c driver
Yuan Yao
12
i2c_smbus_write_block_data: send 2 bytes (command+size) before data
Zvi Vered
none
Wednesday 30 July
Re: i2c-davinci.c: CPU FREQ causes lock up due to xfr_complete
Grygorii Strashko
none
(unknown)
Mrs Sandra
none
Re: i2c-davinci.c: CPU FREQ causes lock up due to xfr_complete
Sekhar Nori
none
Tuesday 29 July
Re: i2c-davinci.c: CPU FREQ causes lock up due to xfr_complete
Jon Cormier
none
Re: i2c-davinci.c: CPU FREQ causes lock up due to xfr_complete
Grygorii Strashko
none
[PATCH 6/7] mfd: cros_ec: Instantiate sub-devices from device tree
Javier Martinez Canillas
2
[PATCH 0/7] Second batch of cleanups for cros_ec
Javier Martinez Canillas SUPERSEDED
6
Re: [PATCH 0/7] Second batch of cleanups for cros_ec
Javier Martinez Canillas
none
Re: [PATCH 0/7] Second batch of cleanups for cros_ec
Andreas Färber
none
Hello
Noemi Alvarez
none
Monday 28 July
Re: i2c: removal of s6000 driver
Wolfram Sang
1
[PATCH] i2c-gpio: Drop dead code in i2c_gpio_remove
Jean Delvare
none
[PATCH] i2c: piix4: Continue probing for auxiliary SMBus without main
Daniel M. Weeks
1
[PATCH 4/7] mfd: cros_ec: move locking into cros_ec_cmd_xfer
Javier Martinez Canillas REVIEWED · 1 review, 0 by maintainers
none
[PATCH v2] i2c: pca954x: put the mux to disconnected state after resume
Jisheng Zhang
2
Re: ddc/ci over i2c
Jean Delvare
none
Friday 25 July
[PATCH/RFC V8 0/1] clk: Default clock parents and rates assigned from DT
Sylwester Nawrocki REVIEWED
2
[PATCH] i2c: pca954x: put the mux to disconnected state after resume
Jisheng Zhang
2
Re: [PATCH 1/1] i2c: Kconfig: Enable HSI2C for Exynos5 platform
Wolfram Sang
1
[PATCH] gpio: extend gpiod_get*() with flags parameter
Alexandre Courbot
6
Thursday 24 July
Vacation
Wolfram Sang
none
[PATCH v4 0/2] i2c: add DMA support for freescale i2c driver
Yuan Yao SUPERSEDED
2
Wednesday 23 July
[PATCH v2] drivers: i2c: i2c-st: Update i2c timings
Maxime COQUELIN
none
i2c,designware: add new bindings
Alan Cox
none
Tuesday 22 July
[PATCH v2 1/5] i2c: Don't start transfers when suspended
Bastian Hecht
11
[PATCH 0/2] use correct type for dma_map/unmap
Wolfram Sang
2
Monday 21 July
[PATCH] drivers: i2c: i2c-st: Update i2c timings
Maxime COQUELIN
2
[PATCH 00/16] i2c: drop class based instantiaion for selected drivers
Wolfram Sang
26
Friday 18 July
Re: [PATCH 1/2] I2C: EMMA Mobile I2C master driver
Wolfram Sang
1
Re: I2C Slave monitor mode support
Wolfram Sang
none
Re: [PATCH] i2c-stub: Avoid an array overrun on I2C block transfers
Wolfram Sang
none
Re: [PATCH] i2c-stub: Avoid an array overrun on I2C block transfers
Wolfram Sang
none
Thursday 17 July
Re: [PATCH] i2c-stub: Avoid an array overrun on I2C block transfers
Jean Delvare
none
Re: [PATCH v2] i2c: efm32: correct namespacing of location property
Wolfram Sang
1
Re: [PATCH] i2c-stub: Avoid an array overrun on I2C block transfers
Wolfram Sang
1
Re: [PATCH v2] i2c-i801: Add device ID for Intel Wildcat Point PCH
Wolfram Sang
none
Re: [PATCH v2] i2c-i801: Fix the alignment of the device table
Wolfram Sang
none
Re: [PATCH 2/2] i2c-stub: Add support for banked register ranges
Wolfram Sang
none
Re: [PATCH 1/2] i2c-stub: Remember the number of emulated chips
Wolfram Sang
none
[PATCH v2] i2c: stub: Add support for SMBus block commands
Guenter Roeck
14
[PATCH 1/5] i2c: Don't start transfers when suspended
Bastian Hecht
4
Re: [PATCH] i2c: i2c-st: Use %pa to print 'resource_size_t' type
Wolfram Sang
none
[PATCH v2] i2c-i801: Add device ID for Intel Wildcat Point PCH
Jean Delvare
none
[PATCH v2] i2c-i801: Fix the alignment of the device table
Jean Delvare
none
[PATCH v3 0/7] i2c: Relax mandatory I2C ID table passing
Lee Jones PENDING · 7 of 9 reviewed
2
[PATCH 1/2 v2] i2c: exynos5: remove an unnecessary read of FIFO_STATUS register
Naveen Krishna Chatradhi
2
Re: [PATCH] i2c-i801: Fix the alignment of the device table
Wolfram Sang
1
Re: autoload i2c-dev module when needed
Michal Minář
none
Re: [PATCH] i2c-i801: Fix the alignment of the device table
Wolfram Sang
1
Wednesday 16 July
[PATCH v2] i2c: s3c2410: resume the I2C controller earlier
Doug Anderson
2
[PATCH v4] i2c: busses: i2c-pxa.c: Fix for possible null pointer dereference
Rickard Strandqvist
1
Re: [PATCH] i2c: scx200: drop GPIO based i2c driver
Wolfram Sang
none
Re: [PATCH] i2c-i801: Add device ID for Intel Wildcat Point PCH
Wolfram Sang
none
[PATCH v3] i2c: exynos5: Properly use the "noirq" variants of suspend/resume
Doug Anderson REVIEWED · 1 review, 0 by maintainers
1
Re: autoload i2c-dev module when needed
Wolfram Sang
none
[PATCH] i2c: scx200: drop GPIO based i2c driver
Wolfram Sang
1
Re: [PATCH] i2c: s6000: remove duplicate driver
Wolfram Sang
none
Sunday 13 July
Re: [PATCH] i2c-stub: Avoid an array overrun on I2C block transfers
Guenter Roeck REVIEWED · 1 review, 0 by maintainers
none
Re: [PATCH] i2c-stub: Avoid an array overrun on I2C block transfers
Jean Delvare
none
Re: [PATCH] i2c-stub: Avoid an array overrun on I2C block transfers
Guenter Roeck
none
[PATCH] i2c-stub: Avoid an array overrun on I2C block transfers
Jean Delvare
none
Re: [PATCH v2] i2c-stub: Allow increasing the SMBus block write length
Guenter Roeck REVIEWED · 1 review, 0 by maintainers
none
[PATCH v2] i2c-stub: Allow increasing the SMBus block write length
Jean Delvare REVIEWED · 1 review, 0 by maintainers
none
Saturday 12 July
[PATCH 5/5] i2c: tegra: Remove suspension check
Bastian Hecht
none
[PATCH 3/5] i2c: exynos5: Remove suspension check
Bastian Hecht
none
[PATCH 2/5] i2c: eg20t: Remove suspension check
Bastian Hecht
none
Friday 11 July
[PATCH v2] i2c: efm32: correct namespacing of location property
Uwe Kleine-König
none
Re: [PATCH] i2c: efm32: correct namespacing of location property
Wolfram Sang
none
Re: [PATCH] i2c: efm32: correct namespacing of location property
Uwe Kleine-König
none
[PATCH] i2c: efm32: correct namespacing of location property
Uwe Kleine-König
none
Re: [PATCH] i2c: i2c-st: Use %pa to print 'resource_size_t' type
Maxime Coquelin REVIEWED · 1 review, 0 by maintainers
none
Re: [PATCH 2/2] i2c-stub: Add support for banked register ranges
Guenter Roeck
none
Thursday 10 July
[PATCH] i2c: i2c-st: Use %pa to print 'resource_size_t' type
Fabio Estevam
none
Re: [PATCH 2/2] i2c-stub: Add support for banked register ranges
Guenter Roeck
none
Re: [PATCH 2/2] i2c-stub: Add support for banked register ranges
Jean Delvare
none
Re: [PATCH 2/2] i2c-stub: Add support for banked register ranges
Guenter Roeck REVIEWED · 1 review, 0 by maintainers
none
Re: [PATCH 09/16] i2c: i2c-ocores: Drop class based scanning to improve bootup time
Peter Korsgaard REVIEWED · 1 review, 0 by maintainers
none
[PULL REQUEST] i2c for 3.16
Wolfram Sang
none
Re: [PATCH 1/2] i2c-stub: Remember the number of emulated chips
Guenter Roeck REVIEWED · 1 review, 0 by maintainers
none
[PATCH v3] i2c: busses: i2c-pxa.c: Fix for possible null pointer dereferenc
Rickard Strandqvist
7
[PATCH 2/2] i2c-stub: Add support for banked register ranges
Jean Delvare
none
[PATCH 1/2] i2c-stub: Remember the number of emulated chips
Jean Delvare
none
Wednesday 9 July
Re: [PATCH 2/5] i2c: pxa: Make of_device_id array const
Haojian Zhuang REVIEWED · 1 review, 0 by maintainers
none
Re: ddc/ci over i2c
Sanford Rockowitz
none
[PATCH] i2c: s6000: remove duplicate driver
Wolfram Sang
none
Tuesday 8 July
Re: ddc/ci over i2c
Jean Delvare
none
ddc/ci over i2c
Sanford Rockowitz
none
Monday 7 July
[RFC PATCH] i2c: stub: Add support for SMBus block commands
Guenter Roeck
3
Friday 4 July
Re: Driver-Support of I2C_M_RECV_LEN
Wolfram Sang
none
Re: Driver-Support of I2C_M_RECV_LEN
Michael Post
none
Re: Driver-Support of I2C_M_RECV_LEN
Michael Post
none
[PATCH] i2c:at91: add bound checking on smbus block length bytes
Marek Roszko
none
Thursday 3 July
[PATCH v2] i2c: busses: i2c-pxa.c: Fix for possible null pointer dereferenc
Rickard Strandqvist
4
[PATCH v2 0/10] Batch of cleanup patches for cros_ec
Doug Anderson PENDING · 8 of 10 reviewed
2
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help