Re: [PATCH v3] ARM: OMAP: i2c: fix interrupt flood during resume

On Wed, Oct 10, 2012 at 5:48 PM, Kalle Jokiniemi
[off-list ref] wrote:

The resume_noirq enables interrupts one-by-one starting from
first one. Now if the wake up event for suspend came from i2c
device, the i2c bus irq gets enabled before the threaded
i2c device irq, causing a flood of i2c bus interrupts as the
threaded irq that should clear the event is not enabled yet.

Fixed the issue by adding suspend_noirq and resume_early
functions that keep i2c bus interrupts disabled until
resume_noirq has run completely.

Issue was detected doing a wake up from autosleep with
twl4030 power key on N9. Patch tested on N9.

Signed-off-by: Kalle Jokiniemi <redacted>

Thanks for rebasing however since you were actually interested in one
of the older
stable releases how about cc stable?