February 2011

247 messages across 173 threads. The 100 most recently active threads.

LastThreadReplies
Monday 28 February
[PATCH] i2c/ocores: Fix pointer type mismatch error
Grant Likely
none
[PATCH RESEND v2] i2c-eg20t: support new device OKI SEMICONDUCTOR ML7213 IOH
Tomoya MORINAGA
1
[PATCH RESEND v2] i2c-eg20t: support new device OKI SEMICONDUCTOR ML7213 IOH
Tomoya MORINAGA
none
Friday 25 February
[PATCH] i2c: mxs: set controller to pio queue mode after reset
Wolfram Sang
none
Re: [PATCH v6] i2c-gpio: add devicetree support
Grant Likely
none
[PATCH] i2c-gpio: add devicetree support
Thomas Chou
12
Thursday 24 February
Re: implementing a slave driver
Marc Dietrich
none
[TLV320AIC23] [AM3517EVM][AUDIO] codec name mis-match in soc_bind_dai_link
Koyamangalath, Abhilash
none
Wednesday 23 February
Re: [PATCH] i2c: tegra: Add i2c support
Colin Cross
5
[PATCH v3 1/2] i2c: xiic: Add OF support for Xilinx i2c bus interface
Michal Simek
8
[RFC PATCH 07/10] i2c: Convert i2c-octeon.c to use device tree.
David Daney SUPERSEDED
1
I2C support for CE4100, v3
Sebastian Andrzej Siewior
6
RE: implementing a slave driver
Fillod Stephane
none
[PATCH RESEND] i2c: eg20t: include slab.h for memory allocations
Wolfram Sang
none
Re: [PATCH] i2c: eg20t: include slab.h for memory allocations
Wolfram Sang
none
Re: implementing a slave driver
Wolfram Sang
none
Re: [PATCH] i2c/busses: Add support for Aeroflex Gaisler I2CMST controller
Peter Korsgaard
none
Re: [PATCH] i2c/busses: Add support for Aeroflex Gaisler I2CMST controller
Jan Andersson
none
Re: [PATCH] i2c/busses: Add support for Aeroflex Gaisler I2CMST controller
Jan Andersson
none
[Patch]PCA9698-Add driver for PCA9698 GPIO Expander Chip on I2C Bus
Balaji Venkatachalam
none
Current i2c-next
Ben Dooks
1
I2C support for CE4100, v3
Sebastian Andrzej Siewior
2
[PATCH] i2c-ocores: register devices on child nodes
Thomas Chou
6
Re: [PATCH] i2c/busses: Add support for Aeroflex Gaisler I2CMST controller
Ben Dooks
none
Re: [PATCH] i2c/busses: Add support for Aeroflex Gaisler I2CMST controller
Ben Dooks
none
[PATCH V2] i2c: add driver for Freescale i.MX28
Wolfram Sang
1
Re: implementing a slave driver
Ben Dooks
none
[PULL] Please pull bjdooks' i2c fixes
Ben Dooks
none
Re: [PATCH] i2c: tegra: Add i2c support
Ben Dooks
none
Tuesday 22 February
[PATCH v2 1/2] i2c: xiic: Add OF support for Xilinx i2c bus interface
Michal Simek
3
mc13xxx-core, support for i2c, V4
Marc Reilly
7
[PATCH] i2c-omap: fix build for !CONFIG_SUSPEND
Balaji T K
none
[PATCH 1/2] i2c: i2c-omap: fix build break with CONFIG_SUSPEND=n
Anand Gadiyar
none
[PATCH 2/2] i2c: i2c-omap: make dev_pm_ops a const struct
Anand Gadiyar
none
Monday 21 February
Re: [PATCH] i2c: xiic: Add OF support for Xilinx i2c bus interface
Grant Likely
none
Sunday 20 February
Re: [PATCH] i2c: tegra: Add i2c support
Colin Cross
none
Re: [PATCH] i2c: eg20t: include slab.h for memory allocations
Ben Dooks
none
Re: [PATCH] i2c: tegra: Add i2c support
Ben Dooks
none
Re: [PATCH] i2c: tegra: Add i2c support
Ben Dooks
none
[PATCH] i2c-eg20t: fix sparse warnings
Stephen Hemminger
none
Re: [PATCH] i2c: tegra: Add i2c support
Colin Cross
none
Re: [PATCH] i2c: tegra: Add i2c support
Colin Cross
none
Re: [PATCH] i2c: Minor fixes to upgrading-clients document
Jean Delvare
none
[PATCH 3/3] i2c: Deprecate i2c_driver.attach_adapter and .detach_adapter
Jean Delvare
none
[PATCH 2/3] i2c-dev: Use standard bus notification mechanism
Jean Delvare
none
Re: [PATCH] i2c: Minor fixes to upgrading-clients document
Wolfram Sang
none
[PATCH 1/3] i2c: Export i2c_for_each_dev
Jean Delvare
none
[PATCH] i2c: Minor fixes to upgrading-clients document
Jean Delvare
none
Saturday 19 February
implementing a slave driver
Marc Dietrich
none
platform/i2c busses: pm runtime and system sleep
Rabin Vincent
12
Friday 18 February
[PATCH 08/29] timberdale: mfd_cell is now implicitly available to drivers (v2)
Andres Salomon
none
Re: [PATCH v2] i2c-omap: Double clear of ARDY status in IRQ handler
J, KEERTHY
none
[PATCH v2] i2c-omap: Double clear of ARDY status in IRQ handler
Keerthy
1
Thursday 17 February
How to deal with pending signals in an i2c bus driver in a correct manner?
Juergen Beisert
none
[PATCH] i2c: make i2c_get_adapter prototype clearer
Jean Delvare
none
[PATCH] NFC: PN544: Add missing regulator.
Matti J. Aaltonen
none
Wednesday 16 February
Re: Using the gpio i2c multiplexer driver
Guenter Roeck
none
RE: [PATCH] i2c: tegra: Add i2c support
Stephen Warren
none
Re: [PATCH] i2c/busses: Add support for Aeroflex Gaisler I2CMST controller
Wolfram Sang
none
Re: [PATCH] i2c/busses: Add support for Aeroflex Gaisler I2CMST controller
Jan Andersson
none
Re: Using the gpio i2c multiplexer driver
Guenter Roeck
none
Re: Using the gpio i2c multiplexer driver
Guenter Roeck
none
Re: [PATCH] i2c/busses: Add support for Aeroflex Gaisler I2CMST controller
Wolfram Sang
none
[PATCH] i2c/busses: Add support for Aeroflex Gaisler I2CMST controller
Jan Andersson
none
Re: [PATCH] i2c: eg20t: include slab.h for memory allocations
Wolfram Sang
none
Using the gpio i2c multiplexer driver
Guenter Roeck
2
Re: [PATCH] i2c-omap: Double clear of ARDY status in IRQ handler
Ben Dooks
1
Tuesday 15 February
Re: [PATCH] i2c: tegra: Add i2c support
Ben Dooks
none
[PATCH 1/6] i2c-pxa: move i2c_pxa_remove to __devexit instead of just __exit
Dmitry Eremin-Solenikov
2
Re: [PATCH v3 0/6] i2cset changes
Jean Delvare
none
Re: [PATCH] i2c-omap: Double clear of ARDY status in IRQ handler
J, KEERTHY
none
Re: [PATCH] i2c-omap: Double clear of ARDY status in IRQ handler
Kevin Hilman
none
Monday 14 February
[PATCH v3 6/6] i2cset: Check range for data value mask
Guenter Roeck
none
[PATCH v2 5/6] i2cset: Get command/mode before reading data
Guenter Roeck
none
[PATCH v3 4/6] i2cset: Ensure that there is no junk after the command/mode parameter
Guenter Roeck
none
[PATCH v2 3/6] i2cset: Abort if value mask is set for block commands
Guenter Roeck
none
[PATCH v3 2/6] i2cset: Check number of arguments for block data writes
Guenter Roeck
none
[PATCH v2 1/6] i2cset: Remove deprecated method to provide the value mask
Guenter Roeck
none
[PATCH v3 0/6] i2cset changes
Guenter Roeck
none
Re: [PATCH v2 1/6] i2cset: Remove deprecated method to provide the value mask
Guenter Roeck
none
[PATCH 5/5] drivers/i2c/busses/i2c-nuc900.c: Convert release_resource to release_region/release_mem_region
Julia Lawall
2
Re: [PATCH v2 1/6] i2cset: Remove deprecated method to provide the value mask
Jean Delvare
none
Re: [PATCH v2 1/6] i2cset: Remove deprecated method to provide the value mask
Guenter Roeck
none
Re: [PATCH] i2c-omap: Double clear of ARDY status in IRQ handler
Jarkko Nikula
1
Re: [PATCH v2 6/6] i2cset: Get command/mode before reading data
Jean Delvare
none
Re: [PATCH v2 5/6] i2cset: Replace blanks at beginning of line with tabs
Jean Delvare
none
Re: [PATCH v2 4/6] i2cset: Ensure that there is no junk after the command/mode parameter
Jean Delvare
none
Re: [PATCH v2 3/6] i2cset: Abort if value mask is set for block commands
Jean Delvare
none
Re: [PATCH v2 2/6] i2cset: Check number of arguments for block data writes
Jean Delvare
none
Re: [PATCH v2 1/6] i2cset: Remove deprecated method to provide the value mask
Jean Delvare
none
Sunday 13 February
[PATCH v2 6/6] i2cset: Get command/mode before reading data
Guenter Roeck
none
[PATCH v2 5/6] i2cset: Replace blanks at beginning of line with tabs
Guenter Roeck
none
[PATCH v2 4/6] i2cset: Ensure that there is no junk after the command/mode parameter
Guenter Roeck
none
[PATCH v2 3/6] i2cset: Abort if value mask is set for block commands
Guenter Roeck
none
[PATCH v2 2/6] i2cset: Check number of arguments for block data writes
Guenter Roeck
none
[PATCH v2 1/6] i2cset: Remove deprecated method to provide the value mask
Guenter Roeck
none
[PATCH v2 0/6] i2cset changes
Guenter Roeck SUPERSEDED
none
Re: i2ctools/i2cset: Remove obsolete means to specify value mask
Guenter Roeck
none
Re: i2ctools/i2cset: Remove obsolete means to specify value mask
Jean Delvare
none
Re: i2ctools/i2cset: Remove obsolete means to specify value mask
Guenter Roeck
none
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help