[PATCH v13A 24/35] x86/fred: Add a NMI entry stub for FRED
From: Xin Li <hidden>
Date: 2023-12-16 07:02:44
Also in:
kvm, linux-doc, linux-edac, lkml, xen-devel
Subsystem:
the rest, x86 architecture (32-bit and 64-bit) · Maintainers:
Linus Torvalds, Thomas Gleixner, Ingo Molnar, Borislav Petkov, Dave Hansen
From: "H. Peter Anvin (Intel)" <hpa@zytor.com> On a FRED system, NMIs nest both with themselves and faults, transient information is saved into the stack frame, and NMI unblocking only happens when the stack frame indicates that so should happen. Thus, the NMI entry stub for FRED is really quite small... Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Tested-by: Shan Kang <redacted> Signed-off-by: Xin Li <redacted> --- Changes since v13: * Save and restore %cr2 upon entering and leaving the FRED NMI handler (H. Peter Anvin). * Remove an unnecessary check "IS_ENABLED(CONFIG_SMP)" (H. Peter Anvin). * Sync a microcode change to the IDT NMI handler from 8f849ff63bcbc to the FRED NMI handler. --- arch/x86/kernel/nmi.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+)
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 17e955ab69fe..1dd8838e5583 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c@@ -35,6 +35,7 @@ #include <asm/nospec-branch.h> #include <asm/microcode.h> #include <asm/sev.h> +#include <asm/fred.h> #define CREATE_TRACE_POINTS #include <trace/events/nmi.h>
@@ -651,6 +652,41 @@ void nmi_backtrace_stall_check(const struct cpumask *btp) #endif +#ifdef CONFIG_X86_FRED +/* + * With FRED, CR2/DR6 is pushed to #PF/#DB stack frame during FRED + * event delivery, i.e., there is no problem of transient states. + * And NMI unblocking only happens when the stack frame indicates + * that so should happen. + * + * Thus, the NMI entry stub for FRED is really straightforward and + * as simple as most exception handlers. As such, #DB is allowed + * during NMI handling. + */ +DEFINE_FREDENTRY_NMI(exc_nmi) +{ + irqentry_state_t irq_state; + + if (arch_cpu_is_offline(smp_processor_id())) { + if (microcode_nmi_handler_enabled()) + microcode_offline_nmi_handler(); + return; + } + + this_cpu_write(nmi_cr2, read_cr2()); + + irq_state = irqentry_nmi_enter(regs); + + inc_irq_stat(__nmi_count); + default_do_nmi(regs); + + irqentry_nmi_exit(regs, irq_state); + + if (unlikely(this_cpu_read(nmi_cr2) != read_cr2())) + write_cr2(this_cpu_read(nmi_cr2)); +} +#endif + void stop_nmi(void) { ignore_nmis++;
--
2.43.0