RE: [PATCH v5 16/16] iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition

From: Wei Liu <wei.liu@kernel.org> Sent: Wednesday, January 20, 2021 4:01 AM

The masking is already done in hv_unmap_interrupt.

+}
+EXPORT_SYMBOL_GPL(hv_unmap_ioapic_interrupt);
+
+int hv_map_ioapic_interrupt(int ioapic_id, bool level, int vcpu, int vector,
+		struct hv_interrupt_entry *entry)
+{
+	unsigned long flags;
+	struct hv_input_map_device_interrupt *input;
+	struct hv_output_map_device_interrupt *output;
+	union hv_device_id device_id;
+	struct hv_device_interrupt_descriptor *intr_desc;
+	u16 status;
+
+	device_id.as_uint64 = 0;
+	device_id.device_type = HV_DEVICE_TYPE_IOAPIC;
+	device_id.ioapic.ioapic_id = (u8)ioapic_id;
+
+	local_irq_save(flags);
+	input = *this_cpu_ptr(hyperv_pcpu_input_arg);
+	output = *this_cpu_ptr(hyperv_pcpu_output_arg);
+	memset(input, 0, sizeof(*input));
+	intr_desc = &input->interrupt_descriptor;
+	input->partition_id = hv_current_partition_id;
+	input->device_id = device_id.as_uint64;
+	intr_desc->interrupt_type = HV_X64_INTERRUPT_TYPE_FIXED;
+	intr_desc->target.vector = vector;
+	intr_desc->vector_count = 1;
+
+	if (level)
+		intr_desc->trigger_mode = HV_INTERRUPT_TRIGGER_MODE_LEVEL;
+	else
+		intr_desc->trigger_mode = HV_INTERRUPT_TRIGGER_MODE_EDGE;
+
+	__set_bit(vcpu, (unsigned long *)&intr_desc->target.vp_mask);
+
+	status = hv_do_rep_hypercall(HVCALL_MAP_DEVICE_INTERRUPT, 0, 0, input, output) &
+			 HV_HYPERCALL_RESULT_MASK;
+	local_irq_restore(flags);
+
+	*entry = output->interrupt_entry;
+
+	return status;

As a cross-check, I was comparing this code against hv_map_msi_interrupt().  They are
mostly parallel, though some of the assignments are done in a different order.  It's a nit,
but making them as parallel as possible would be nice. :-)

Same 64 vCPU comment applies here as well.

Any reason that the check for hv_root_partition was added
in patch #4  of this series, and then removed here?  Could
patch #4 just be dropped?

Does 'data' need to be checked to be non-NULL?  The parallel code in
hv_irq_compose_msi_msg() makes such a check.

+	    && data->entry.ioapic_rte.as_uint64) {
+		entry = data->entry;
+
+		status = hv_unmap_ioapic_interrupt(ioapic_id, &entry);
+
+		if (status != HV_STATUS_SUCCESS)
+			pr_debug("%s: unexpected unmap status %d\n", __func__, status);
+
+		data->entry.ioapic_rte.as_uint64 = 0;
+		data->entry.source = 0; /* Invalid source */

Again comparing, hv_irq_compose_msi_msg() frees the old
entry, and then allocates a new one.   This code reuses the old entry. 
Any reason for the difference?

+	}
+
+
+	status = hv_map_ioapic_interrupt(ioapic_id, data->is_level, vcpu,
+					vector, &entry);
+
+	if (status != HV_STATUS_SUCCESS) {
+		pr_err("%s: map hypercall failed, status %d\n", __func__, status);
+		return;
+	}
+
+	data->entry = entry;
+
+	/* Turn it into an IO_APIC_route_entry, and generate MSI MSG. */
+	e.w1 = entry.ioapic_rte.low_uint32;
+	e.w2 = entry.ioapic_rte.high_uint32;
+
+	memset(msg, 0, sizeof(*msg));
+	msg->arch_data.vector = e.vector;
+	msg->arch_data.delivery_mode = e.delivery_mode;
+	msg->arch_addr_lo.dest_mode_logical = e.dest_mode_logical;
+	msg->arch_addr_lo.dmar_format = e.ir_format;
+	msg->arch_addr_lo.dmar_index_0_14 = e.ir_index_0_14;
+}

Having this whole function be more parallel to hv_irq_compose_msi_msg()
would be nice. :-)

+
+static int hyperv_root_ir_set_affinity(struct irq_data *data,
+		const struct cpumask *mask, bool force)
+{
+	struct irq_data *parent = data->parent_data;
+	struct irq_cfg *cfg = irqd_cfg(data);
+	int ret;
+
+	ret = parent->chip->irq_set_affinity(parent, mask, force);
+	if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE)
+		return ret;
+
+	send_cleanup_vector(cfg);
+
+	return 0;
+}
+
+static struct irq_chip hyperv_root_ir_chip = {
+	.name			= "HYPERV-ROOT-IR",
+	.irq_ack		= apic_ack_irq,
+	.irq_set_affinity	= hyperv_root_ir_set_affinity,
+	.irq_compose_msi_msg	= hyperv_root_ir_compose_msi_msg,
+};
+
+static int hyperv_root_irq_remapping_alloc(struct irq_domain *domain,
+				     unsigned int virq, unsigned int nr_irqs,
+				     void *arg)
+{
+	struct irq_alloc_info *info = arg;
+	struct irq_data *irq_data;
+	struct hyperv_root_ir_data *data;
+	int ret = 0;
+
+	if (!info || info->type != X86_IRQ_ALLOC_TYPE_IOAPIC || nr_irqs > 1)
+		return -EINVAL;
+
+	ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
+	if (ret < 0)
+		return ret;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		irq_domain_free_irqs_common(domain, virq, nr_irqs);
+		return -ENOMEM;
+	}
+
+	irq_data = irq_domain_get_irq_data(domain, virq);
+	if (!irq_data) {
+		kfree(data);
+		irq_domain_free_irqs_common(domain, virq, nr_irqs);
+		return -EINVAL;
+	}
+
+	data->ioapic_id = info->devid;
+	data->is_level = info->ioapic.is_level;
+
+	irq_data->chip = &hyperv_root_ir_chip;
+	irq_data->chip_data = data;
+
+	return 0;
+}
+
+static void hyperv_root_irq_remapping_free(struct irq_domain *domain,
+				 unsigned int virq, unsigned int nr_irqs)
+{
+	struct irq_data *irq_data;
+	struct hyperv_root_ir_data *data;
+	struct hv_interrupt_entry *e;
+	int i;
+
+	for (i = 0; i < nr_irqs; i++) {
+		irq_data = irq_domain_get_irq_data(domain, virq + i);
+
+		if (irq_data && irq_data->chip_data) {
+			data = irq_data->chip_data;

Set irq_data->chip_data to NULL?  That seems to be done in other
similar places in your code.

+			e = &data->entry;
+
+			if (e->source == HV_DEVICE_TYPE_IOAPIC
+			      && e->ioapic_rte.as_uint64)
+				hv_unmap_ioapic_interrupt(data->ioapic_id,
+							&data->entry);
+
+			kfree(data);
+		}
+	}
+
+	irq_domain_free_irqs_common(domain, virq, nr_irqs);
+}
+
+static const struct irq_domain_ops hyperv_root_ir_domain_ops = {
+	.select = hyperv_irq_remapping_select,
+	.alloc = hyperv_root_irq_remapping_alloc,
+	.free = hyperv_root_irq_remapping_free,
+};
+
 #endif
--
2.20.1