On 2019/6/2 6:59, Michael Kelley wrote:

From: YueHaibing <redacted>  Sent: Friday, May 31, 2019 8:09 AM

quoted

while building without CONFIG_SYSFS, fails as below:

drivers/pci/controller/pci-hyperv.o: In function 'hv_pci_assign_slots':
pci-hyperv.c:(.text+0x40a): undefined reference to 'pci_create_slot'
drivers/pci/controller/pci-hyperv.o: In function 'pci_devices_present_work':
pci-hyperv.c:(.text+0xc02): undefined reference to 'pci_destroy_slot'
drivers/pci/controller/pci-hyperv.o: In function 'hv_pci_remove':
pci-hyperv.c:(.text+0xe50): undefined reference to 'pci_destroy_slot'
drivers/pci/controller/pci-hyperv.o: In function 'hv_eject_device_work':
pci-hyperv.c:(.text+0x11f9): undefined reference to 'pci_destroy_slot'

Select SYSFS while PCI_HYPERV is set to fix this.

I'm wondering if is the right way to fix the problem.  Conceptually
is it possible to setup & operate virtual PCI devices like 
pci-hyperv.c does, even if sysfs is not present?  Or is it right to
always required sysfs?

The function pci_dev_assign_slot() in slot.c has a null implementation
in include/linux/pci.h when CONFIG_SYSFS is not defined, which
seems to be trying to solve the same problem for that function.  And
if CONFIG_HOTPLUG_PCI is defined but CONFIG_SYSFS is not,
pci_hp_create_module_link() and pci_hp_remove_module_link()
look like they would have the same problem.  Maybe there should
be degenerate implementations of pci_create_slot() and
pci_destroy_slot() for cases when CONFIG_SYSFS is not defined?

But I'll admit I don't know the full story behind how PCI slots
are represented and used, so maybe I'm off base.  I just noticed
the inconsistency in how other functions in slot.c are handled.

Thoughts?

268a03a42d33 ("PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS")

make slot.o depends CONFIG_SYSFS

commit 268a03a42d3377d5fb41e6e7cbdec4e0b65cab2e
Author: Alex Chiang [off-list ref]
Date:   Wed Jun 17 19:03:57 2009 -0600

    PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS

    There is no way to interact with a physical PCI slot without
    sysfs, so encode the dependency and prevent this build error:

        drivers/pci/slot.c: In function 'pci_hp_create_module_link':
        drivers/pci/slot.c:327: error: 'module_kset' undeclared

    This patch _should_ make pci-sysfs.o depend on CONFIG_SYSFS too,
    but we cannot (yet) because the PCI core merrily assumes the
    existence of sysfs:

        drivers/built-in.o: In function `pci_bus_add_device':
        drivers/pci/bus.c:89: undefined reference to `pci_create_sysfs_dev_files'
        drivers/built-in.o: In function `pci_stop_dev':
        drivers/pci/remove.c:24: undefined reference to `pci_remove_sysfs_dev_files'

    So do the minimal bit for now and figure out how to untangle it
    later.

If No CONFIG_SYSFS, slot.o is not build

Michael