Re: [PATCH] dt-bindings: pinctrl: Use consistent indentation in the example
flat view
From: Gary Yang <gary.yang@cixtech.com>
Date: 2026-09-14 02:22:02
Also in:
imx, linux-arm-kernel, linux-arm-msm, linux-devicetree, linux-mediatek, lkml
On 2026-09-13 14:32, Krzysztof Kozlowski wrote:
EXTERNAL EMAIL
Correct indentation in the examples to consistent 2- or 4-spaces
indentation to fix dt-check-style warnings ("example 0
[indent-consistent] indent mismatch ..."). Preferred is 4-spaces, but
re-indenting entire example just for that is too much churn.
Signed-off-by: Krzysztof Kozlowski <redacted>For the cix part: Reviewed-by: Gary Yang <gary.yang@cixtech.com>
quoted hunk ↗ jump to hunk
--- .../pinctrl/awinic,aw9523-pinctrl.yaml | 50 +++++++++---------- .../bindings/pinctrl/cix,sky1-pinctrl.yaml | 2 +- .../bindings/pinctrl/fsl,imx7d-pinctrl.yaml | 8 +-- .../bindings/pinctrl/intel,lgm-io.yaml | 14 +++--- .../pinctrl/mediatek,mt8183-pinctrl.yaml | 4 +- .../pinctrl/mediatek,mt8195-pinctrl.yaml | 2 +- .../bindings/pinctrl/qcom,hawi-tlmm.yaml | 4 +- .../bindings/pinctrl/qcom,kaanapali-tlmm.yaml | 4 +- .../bindings/pinctrl/qcom,maili-tlmm.yaml | 4 +- .../bindings/pinctrl/semtech,sx1501q.yaml | 4 +- .../bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml | 46 ++++++++--------- 11 files changed, 71 insertions(+), 71 deletions(-)diff --git a/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml index 98c310a3c63c..1c09c0fd4930 100644 --- a/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml@@ -108,32 +108,32 @@ examples: #size-cells = <0>; aw9523: gpio-expander@58 { - compatible = "awinic,aw9523-pinctrl"; - reg = <0x58>; - interrupt-parent = <&tlmm>; - interrupts = <50 IRQ_TYPE_EDGE_FALLING>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 16>; - interrupt-controller; - #interrupt-cells = <2>; - reset-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>; + compatible = "awinic,aw9523-pinctrl"; + reg = <0x58>; + interrupt-parent = <&tlmm>; + interrupts = <50 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 16>; + interrupt-controller; + #interrupt-cells = <2>; + reset-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>; - keyboard-matrix-col-pins { - pins = "gpio8", "gpio9", "gpio10", "gpio11", - "gpio12", "gpio13", "gpio14", "gpio15"; - function = "gpio"; - input-disable; - output-low; - }; + keyboard-matrix-col-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gpio"; + input-disable; + output-low; + }; - keyboard-matrix-row-pins { - pins = "gpio0", "gpio1", "gpio2", "gpio3", - "gpio4", "gpio5", "gpio6", "gpio7"; - function = "gpio"; - bias-pull-up; - drive-open-drain; - input-enable; - }; + keyboard-matrix-row-pins { + pins = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6", "gpio7"; + function = "gpio"; + bias-pull-up; + drive-open-drain; + input-enable; + }; }; };diff --git a/Documentation/devicetree/bindings/pinctrl/cix,sky1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/cix,sky1-pinctrl.yaml index 8ed53496c386..4ab1f00775cc 100644 --- a/Documentation/devicetree/bindings/pinctrl/cix,sky1-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cix,sky1-pinctrl.yaml@@ -86,6 +86,6 @@ examples: pinmux = <CIX_PAD_GPIO012_FUNC_GPIO012>; bias-pull-up; drive-strength = <8>; - }; + }; }; };diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml index 948160cfbc5f..7275215918bb 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml@@ -106,8 +106,8 @@ examples: fsl,input-sel = <&iomuxc>; pinctrl_gpio_lpsr: gpio1-grp { - fsl,pins = - <0x0008 0x0038 0x0000 0x0 0x0 0x59>, - <0x000C 0x003C 0x0000 0x0 0x0 0x59>; - }; + fsl,pins = + <0x0008 0x0038 0x0000 0x0 0x0 0x59>, + <0x000C 0x003C 0x0000 0x0 0x0 0x59>; + }; };diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml index 1144ca2896e3..96c405711f65 100644 --- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml +++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml@@ -64,13 +64,13 @@ examples: reg = <0xe2880000 0x100000>; uart0-pins { - pins = <64>, /* UART_RX0 */ - <65>; /* UART_TX0 */ - function = "CONSOLE_UART0"; - pinmux = <1>, - <1>; - groups = "CONSOLE_UART0"; - }; + pins = <64>, /* UART_RX0 */ + <65>; /* UART_TX0 */ + function = "CONSOLE_UART0"; + pinmux = <1>, + <1>; + groups = "CONSOLE_UART0"; + }; }; ...diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml index 3db2438fadc7..4bcee7741fcd 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml@@ -221,8 +221,8 @@ examples: i2c0_pins_a: i2c0-pins { pins1 { - pinmux = <PINMUX_GPIO48__FUNC_SCL5>, - <PINMUX_GPIO49__FUNC_SDA5>; + pinmux = <PINMUX_GPIO48__FUNC_SCL5>, + <PINMUX_GPIO49__FUNC_SDA5>; mediatek,pull-up-adv = <3>; drive-strength-microamp = <1000>; };diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.yaml index 33cb71775db9..0bcafa78acb2 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.yaml@@ -234,7 +234,7 @@ examples: - | #include <dt-bindings/pinctrl/mt8195-pinfunc.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - # + pio: pinctrl@10005000 { compatible = "mediatek,mt8195-pinctrl"; reg = <0x10005000 0x1000>,diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,hawi-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,hawi-tlmm.yaml index 3b3961789860..2b1354e212e5 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,hawi-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,hawi-tlmm.yaml@@ -113,8 +113,8 @@ examples: #interrupt-cells = <2>; qup-uart7-state { - pins = "gpio62", "gpio63"; - function = "qup1_se7"; + pins = "gpio62", "gpio63"; + function = "qup1_se7"; }; }; ...diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,kaanapali-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,kaanapali-tlmm.yaml index 53534a07a1f0..ea7d4768483d 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,kaanapali-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,kaanapali-tlmm.yaml@@ -120,8 +120,8 @@ examples: #interrupt-cells = <2>; qup-uart7-state { - pins = "gpio62", "gpio63"; - function = "qup1_se7"; + pins = "gpio62", "gpio63"; + function = "qup1_se7"; }; }; ...diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,maili-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,maili-tlmm.yaml index 64fe90b2391b..a0b56adb3388 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,maili-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,maili-tlmm.yaml@@ -113,8 +113,8 @@ examples: #interrupt-cells = <2>; qup-uart7-state { - pins = "gpio62", "gpio63"; - function = "qup1_se7"; + pins = "gpio62", "gpio63"; + function = "qup1_se7"; }; }; ...diff --git a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml index 39d7dad3313b..f7a7551d7f50 100644 --- a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml +++ b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml@@ -244,8 +244,8 @@ examples: interrupt-controller; gpio1-cfg { - pins = "gpio1"; - bias-pull-up; + pins = "gpio1"; + bias-pull-up; }; }; };diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml index ce66fd15ff9c..300d38f87f2d 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml@@ -317,37 +317,37 @@ examples: #include <dt-bindings/pinctrl/pinctrl-zynqmp.h> zynqmp_firmware: zynqmp-firmware { pinctrl0: pinctrl { - compatible = "xlnx,zynqmp-pinctrl"; + compatible = "xlnx,zynqmp-pinctrl"; - pinctrl_uart1_default: uart1-default { - mux { - groups = "uart0_4_grp", "uart0_5_grp"; - function = "uart0"; - }; + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart0_4_grp", "uart0_5_grp"; + function = "uart0"; + }; - conf { - groups = "uart0_4_grp"; - slew-rate = <SLEW_RATE_SLOW>; - power-source = <IO_STANDARD_LVCMOS18>; - }; + conf { + groups = "uart0_4_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; - conf-rx { - pins = "MIO18"; - bias-pull-up; - }; + conf-rx { + pins = "MIO18"; + bias-pull-up; + }; - conf-tx { - pins = "MIO19"; - bias-disable; - input-schmitt-disable; - }; - }; + conf-tx { + pins = "MIO19"; + bias-disable; + input-schmitt-disable; + }; + }; }; }; uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_default>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; ... --2.53.0