[PATCH 3/4] pinctrl: qcom: msm8916: Allow CAMSS GP clocks to be muxed
From: Nikita Travkin <hidden>
Date: 2021-12-09 16:37:54
Also in:
linux-arm-msm, linux-clk, lkml
Subsystem:
arm/qualcomm mailing list, pin control subsystem, pin controller - qualcomm, the rest · Maintainers:
Linus Walleij, Bjorn Andersson, Linus Torvalds
GPIO 31, 32 can be muxed to GCC_CAMSS_GP(1,2)_CLK respectively but the
function was never assigned to the pingroup (even though the function
exists already).
Add this mode to the related pins.
Fixes: 5373a2c5abb6 ("pinctrl: qcom: Add msm8916 pinctrl driver")
Signed-off-by: Nikita Travkin <redacted>
---
drivers/pinctrl/qcom/pinctrl-msm8916.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm8916.c b/drivers/pinctrl/qcom/pinctrl-msm8916.c
index 396db12ae904..bf68913ba821 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm8916.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm8916.c@@ -844,8 +844,8 @@ static const struct msm_pingroup msm8916_groups[] = { PINGROUP(28, pwr_modem_enabled_a, NA, NA, NA, NA, NA, qdss_tracedata_b, NA, atest_combodac), PINGROUP(29, cci_i2c, NA, NA, NA, NA, NA, qdss_tracedata_b, NA, atest_combodac), PINGROUP(30, cci_i2c, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b), - PINGROUP(31, cci_timer0, NA, NA, NA, NA, NA, NA, NA, NA), - PINGROUP(32, cci_timer1, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(31, cci_timer0, flash_strobe, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(32, cci_timer1, flash_strobe, NA, NA, NA, NA, NA, NA, NA), PINGROUP(33, cci_async, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b), PINGROUP(34, pwr_nav_enabled_a, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b), PINGROUP(35, pwr_crypto_enabled_a, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b),
--
2.30.2