On Fri, Oct 29, 2021 at 05:02:02PM -0700, quic_vamslank@quicinc.com wrote:

From: Vamsi Krishna Lanka <redacted>

Hello,

Changes from v2:
 - Added cmd-db node to the sdx65 dtsi file

Changes from v1:
 - Addressed Bjorn's comments

This series adds devicetree support for Qualcomm SDX65 platform and MTP
board. This series functionally depends on Add Pdc, GCC and RPMh Clock support
series [1] and Add pinctrl support for SDX65 [2] which are under review.

With this current devicetree support, the MTP can boot into initramfs
shell.

Thanks,
Vamsi

Can you please review this patch series. It's been pending since longtime now.

Thanks,
Vamsi

Vamsi krishna Lanka (3):
  dt-bindings: arm: qcom: Document SDX65 platform and boards
  ARM: dts: qcom: Add SDX65 platform and MTP board support
  ARM: dts: qcom: sdx65: Add pincontrol node

 Documentation/devicetree/bindings/arm/qcom.yaml |   6 +
 arch/arm/boot/dts/Makefile                      |   3 +-
 arch/arm/boot/dts/qcom-sdx65-mtp.dts            |  25 +++
 arch/arm/boot/dts/qcom-sdx65.dtsi               | 222 ++++++++++++++++++++++++
 4 files changed, 255 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/qcom-sdx65-mtp.dts
 create mode 100644 arch/arm/boot/dts/qcom-sdx65.dtsi

-- 
2.7.4