On Tue, Nov 23, 2021 at 12:59 PM Hans de Goede [off-list ref] wrote:

On 11/23/21 10:36, Andy Shevchenko wrote:

quoted

On Mon, Nov 22, 2021 at 11:04:16PM +0100, Hans de Goede wrote:

quoted

If the IRQ is already in use, then acpi_dev_gpio_irq_get_by() really
should not change the type underneath the current owner.

I specifically hit an issue with this an a Chuwi Hi8 Super (CWI509) Bay
Trail tablet, when the Boot OS selection in the BIOS is set to Android.
In this case _STA for a MAX17047 ACPI I2C device wrongly returns 0xf and
the _CRS resources for this device include a GpioInt pointing to a GPIO
already in use by an _AEI handler, with a different type then specified
in the _CRS for the MAX17047 device. Leading to the acpi_dev_gpio_irq_get()
call done by the i2c-core-acpi.c code changing the type breaking the
_AEI handler.

Now this clearly is a bug in the DSDT of this tablet (in Android mode),
but in general calling irq_set_irq_type() on an IRQ which already is
in use seems like a bad idea.

I'm fine with the change, one comment below, though.

quoted

Signed-off-by: Hans de Goede <redacted>
---
 drivers/gpio/gpiolib-acpi.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 985e8589c58b..24cd86bf2c4c 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c

@@ -1056,8 +1056,12 @@ int acpi_dev_gpio_irq_get_by(struct acpi_device *adev, const char *name, int ind
                     irq_flags = acpi_dev_get_irq_type(info.triggering,
                                                       info.polarity);

-                    /* Set type if specified and different than the current one */
-                    if (irq_flags != IRQ_TYPE_NONE &&
+                    /*
+                     * If the IRQ is not already in use then set type
+                     * if specified and different than the current one.
+                     */
+                    if (can_request_irq(irq, irq_flags) &&
+                        irq_flags != IRQ_TYPE_NONE &&
                         irq_flags != irq_get_trigger_type(irq))
                             irq_set_irq_type(irq, irq_flags);

What about issuing a debug (?) message

                      if (can_request_irq(irq, irq_flags) {
                              if (irq_flags != IRQ_TYPE_NONE &&
                                  irq_flags != irq_get_trigger_type(irq))
                                      irq_set_irq_type(irq, irq_flags);
                      } else {
                              dev_dbg(..., FW_BUG "IRQ %d already in use\n", irq);
                      }

?

That is a good idea, I would even be fine with making it a dev_warn, because it
really is a FW_BUG if we get here. If we turn out to hit this too much we
can always lower the log level later.

Shall I submit a v2 with your suggestion, but then using a dev_warn ?

Please do, it will be slightly easier for me.

-- 
With Best Regards,
Andy Shevchenko