The byt_irq_type function ends with the IRQ masked, this means that calls
to irq_set_irq_type() while the IRQ is enabled end up masking it, which
is wrong. Add the IRQCHIP_SET_TYPE_MASKED flag to fix this.

This will make the IRQ core call mask() + unmask() on the IRQ around
a set_type() call when the IRQ is enabled at the type of the call.

Note in practice irq_set_irq_type() getting called while the IRQ is enabled
almost never happens. I hit this with a buggy DSDT where a wrongly active
(_STA returns 0xf) I2C ACPI devices point to an IRQ already in use by an
_AEI handler, leading to the irq_set_irq_type() call in
acpi_dev_gpio_irq_get_by() getting called while the IRQ is enabled.

Signed-off-by: Hans de Goede <redacted>
---
 drivers/pinctrl/intel/pinctrl-baytrail.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index 744ebe417bff..e3dd105e2f6e 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c

@@ -1554,7 +1554,8 @@ static int byt_gpio_probe(struct intel_pinctrl *vg)
 		vg->irqchip.irq_mask = byt_irq_mask,
 		vg->irqchip.irq_unmask = byt_irq_unmask,
 		vg->irqchip.irq_set_type = byt_irq_type,
-		vg->irqchip.flags = IRQCHIP_SKIP_SET_WAKE,
+		vg->irqchip.flags = IRQCHIP_SKIP_SET_WAKE |
+				    IRQCHIP_SET_TYPE_MASKED,
 
 		girq = &gc->irq;
 		girq->chip = &vg->irqchip;

-- 
2.33.1