[RESEND PATCH V7 3/3] dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property
flat view
STALE1894d
LANDED: 7 (6M)
From: satya priya <hidden>
Date: 2021-08-02 13:22:11
Also in:
linux-arm-msm, linux-devicetree, lkml
Subsystem:
arm/qualcomm mailing list, open firmware and flattened device tree bindings, pin control subsystem, pin controller - qualcomm, qualcomm pinctrl drivers, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Bjorn Andersson, Bartosz Golaszewski, Linus Torvalds
Revision v7 of 2 in this series; 2 review trailers (1 from subsystem maintainers); landed in mainline as f03f5c75f5dd on 2021-08-11.
Revisions (2)
- v7
- v7 current
Remove the interrupts property as we no longer specify it. Signed-off-by: satya priya <redacted> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <redacted> --- Changes in V5: - This is newly added in V5.As per Bjorn's comments on [1] removed the interrupts property as it is no longer used. [1] https://lore.kernel.org/patchwork/patch/1434144/ Changes in V6: - No changes. Changes in V7: - No changes. Changes in RESEND V7: - Rebased on linux-next. .../bindings/pinctrl/qcom,pmic-gpio.yaml | 28 ++++------------------ 1 file changed, 4 insertions(+), 24 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index 7a0d2d8..9bd01db 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml@@ -56,18 +56,11 @@ properties: reg: maxItems: 1 - interrupts: - minItems: 1 - maxItems: 44 - description: - Must contain an array of encoded interrupt specifiers for - each available GPIO + interrupt-controller: true '#interrupt-cells': const: 2 - interrupt-controller: true - gpio-controller: true gpio-ranges:
@@ -87,6 +80,7 @@ required: - gpio-controller - '#gpio-cells' - gpio-ranges + - interrupt-controller patternProperties: '-state$':
@@ -223,22 +217,8 @@ examples: pm8921_gpio: gpio@150 { compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio"; reg = <0x150 0x160>; - interrupts = <192 1>, <193 1>, <194 1>, - <195 1>, <196 1>, <197 1>, - <198 1>, <199 1>, <200 1>, - <201 1>, <202 1>, <203 1>, - <204 1>, <205 1>, <206 1>, - <207 1>, <208 1>, <209 1>, - <210 1>, <211 1>, <212 1>, - <213 1>, <214 1>, <215 1>, - <216 1>, <217 1>, <218 1>, - <219 1>, <220 1>, <221 1>, - <222 1>, <223 1>, <224 1>, - <225 1>, <226 1>, <227 1>, - <228 1>, <229 1>, <230 1>, - <231 1>, <232 1>, <233 1>, - <234 1>, <235 1>; - + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; gpio-ranges = <&pm8921_gpio 0 0 44>; #gpio-cells = <2>;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation