On Mon, 19 Jul 2021 16:37:34 +0530, satya priya wrote:

Convert Qualcomm PMIC GPIO bindings from .txt to .yaml format.

Signed-off-by: satya priya <redacted>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes in V2:
 - As per Rob's comments fixed bot erros.
 - Moved this patch to end of the series so that other patches are not
   blocked on this.

Changes in V3:
 - As per Rob's comments, added maxItems for reg and interrupts.
   Added reference of "pinmux-node.yaml" and "pincfg-node.yaml".
   Made 'additionalProperties' as false.

Changes in V4:
 - As per Rob's comments, added description for interrupts, defined
   constraints for "qcom,drive-strength", dropped description for function
   property.

Changes in RESEND V4:
 - Rebased on linux-next and sent.

Changes in V5:
 - Fixed Bjorn's comments on [1]

 [1] https://lore.kernel.org/patchwork/patch/1434144/

Changes in V6:
 - As per Bjorn's comments, removed formatting for description, changed
   node name to be more specific to qcom pmic, and fixed few other minor
   things as suggested here [2].

 [2] https://lore.kernel.org/patchwork/patch/1452812/#1654560

 .../devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 288 ---------------------
 .../bindings/pinctrl/qcom,pmic-gpio.yaml           | 259 ++++++++++++++++++
 2 files changed, 259 insertions(+), 288 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/qcom,pm8008.example.dt.yaml: gpio@c000: compatible: ['qcom,pm8008-gpio'] is too short
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/qcom,pm8008.example.dt.yaml: gpio@c000: 'gpio-ranges' is a required property
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1506906

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.