[PATCH v3 1/2] ARM: dts: da850-lego-ev3: align GPIO hog names with dt-schema
From: Aswath Govindraju <hidden>
Date: 2021-05-24 15:24:29
Also in:
linux-arm-kernel, linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The GPIO hog dt-schema node naming convention expect GPIO hogs node names to end with a 'hog' suffix. Signed-off-by: Aswath Govindraju <redacted> --- arch/arm/boot/dts/da850-lego-ev3.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index afd04a423856..1e86cde86406 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts@@ -412,14 +412,14 @@ status = "okay"; /* Don't pull down battery voltage adc io channel */ - batt_volt_en { + batt-volt-en-hog { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; output-high; }; /* Don't impede Bluetooth clock signal */ - bt_clock_en { + bt-clock-en-hog { gpio-hog; gpios = <5 GPIO_ACTIVE_HIGH>; input;
@@ -433,19 +433,19 @@ * anything, but they are present in the source code from LEGO. */ - bt_pic_en { + bt-pic-en-hog { gpio-hog; gpios = <51 GPIO_ACTIVE_HIGH>; output-low; }; - bt_pic_rst { + bt-pic-rst-hog { gpio-hog; gpios = <78 GPIO_ACTIVE_HIGH>; output-high; }; - bt_pic_cts { + bt-pic-cts-hog { gpio-hog; gpios = <87 GPIO_ACTIVE_HIGH>; input;
--
2.17.1