Re: [PATCH 06/15] dt_bindings: regulator: Add ROHM BD71815 PMIC regulators

On Tue, Jan 12, 2021 at 08:10:14AM +0200, Matti Vaittinen wrote:

On Mon, 2021-01-11 at 13:09 -0600, Rob Herring wrote:

quoted

On Fri, Jan 08, 2021 at 03:36:38PM +0200, Matti Vaittinen wrote:

quoted

Add binding documentation for regulators on ROHM BD71815 PMIC.
5 bucks, 7 LDOs and a boost for LED.

Signed-off-by: Matti Vaittinen <redacted>
---
 .../regulator/rohm,bd71815-regulator.yaml     | 104
++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644
Documentation/devicetree/bindings/regulator/rohm,bd71815-
regulator.yaml

diff --git
a/Documentation/devicetree/bindings/regulator/rohm,bd71815-
regulator.yaml
b/Documentation/devicetree/bindings/regulator/rohm,bd71815-
regulator.yaml
new file mode 100644
index 000000000000..2aa21603698c

--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-

regulator.yaml

@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: 

http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71815 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen [off-list ref]
+
+description: |
+  This module is part of the ROHM BD718215 MFD device. For more
details
+  see Documentation/devicetree/bindings/mfd/rohm,bd71815-
pmic.yaml.
+
+  The regulator controller is represented as a sub-node of the
PMIC node
+  on the device tree.
+
+  The valid names for BD71815 regulator nodes are
+  buck1, buck2, buck3, buck4, buck5,
+  ldo1, ldo2, ldo3, ldo4, ldo5,
+  ldodvref, ldolpsr, wled

No schema for the last 3?

Thanks Rob. I'm unsure what I have been thinking of :( I'll fix this
for next version.

quoted

quoted

+
+patternProperties:
+  "^(ldo|buck)[1-5]$":
+    type: object
+    description:
+      Properties for single LDO/BUCK regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^(ldo|buck)[1-5]$"
+        description:
+          should be "ldo1", ..., "ldo5" and "buck1", ..., "buck5"
+
+      rohm,vsel-gpios:
+        description:
+          GPIO used to control ldo4 state (when ldo4 is controlled
by GPIO).
+
+      rohm,dvs-run-voltage:

These should have a unit suffix.

I know but these are existing properties. I'd like to re-use them as
they have exported parser helpers - and I am unsure what kind of
breakages changing them would cause. (The BD71837/BD71847 which
introduced these properties are one of the PMICs which are pretty
widely used.)

Okay. Hopefully I remember next time I see this...

Rob