[PATCH v2 2/4] pinctrl: sunxi: h6-r: Add s_rsb pin functions
From: Samuel Holland <samuel@sholland.org>
Date: 2021-01-03 10:01:14
Also in:
linux-arm-kernel, linux-clk, linux-devicetree, lkml
Subsystem:
arm/allwinner sunxi soc support, pin control subsystem, the rest · Maintainers:
Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Linus Walleij, Linus Torvalds
As there is an RSB controller in the H6 SoC, there should be some pin configuration for it. While no such configuration is documented, the "s_i2c" pins are suspiciously on the "alternate" function 3, with no primary function 2 given. This suggests the primary function for these pins is actually RSB, and that is indeed the case. Add the "s_rsb" pin functions so the RSB controller can be used. Signed-off-by: Samuel Holland <samuel@sholland.org> --- drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
index 4557e18d5989..c7d90c44e87a 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c@@ -24,11 +24,13 @@ static const struct sunxi_desc_pin sun50i_h6_r_pins[] = { SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 0), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "s_rsb"), /* SCK */ SUNXI_FUNCTION(0x3, "s_i2c"), /* SCK */ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)), /* PL_EINT0 */ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 1), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "s_rsb"), /* SDA */ SUNXI_FUNCTION(0x3, "s_i2c"), /* SDA */ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)), /* PL_EINT1 */ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 2),
--
2.26.2