[PATCH v3 02/10] gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: 2017-05-26 16:03:20
Also in:
linux-serial, lkml
Subsystem:
8250/16?50 (and clone uarts) serial driver, gpio subsystem, the rest, tty layer and serial drivers · Maintainers:
Greg Kroah-Hartman, Linus Walleij, Bartosz Golaszewski, Linus Torvalds, Jiri Slaby
Commtech adapters need the MPIOs for internal purposes, and the gpio-exar driver already refused to pick them up. But there is actually no point in even creating the underlying platform device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> --- drivers/gpio/gpio-exar.c | 3 --- drivers/tty/serial/8250/8250_exar.c | 4 +++- 2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c
index 081076771217..006a9a67c2a4 100644
--- a/drivers/gpio/gpio-exar.c
+++ b/drivers/gpio/gpio-exar.c@@ -124,9 +124,6 @@ static int gpio_exar_probe(struct platform_device *pdev) void __iomem *p; int index, ret; - if (pcidev->vendor != PCI_VENDOR_ID_EXAR) - return -ENODEV; - /* * Map the pci device to get the register addresses. * We will need to read and write those registers to control
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 8984e8b2d524..c29c7e675890 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c@@ -245,7 +245,9 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev, /* Setup Multipurpose Input/Output pins. */ setup_gpio(pcidev, p); - port->port.private_data = xr17v35x_register_gpio(pcidev); + if (pcidev->vendor == PCI_VENDOR_ID_EXAR) + port->port.private_data = + xr17v35x_register_gpio(pcidev); } return 0;
--
2.12.0