Thread (7 messages) 7 messages, 2 authors, 2017-01-30
STALE3428d
Revisions (2)
  1. v1 current
  2. v2 [diff vs current]

[PATCH 4/5] gpio: gpio-mm: Add support for GPIO names

From: William Breathitt Gray <hidden>
Date: 2017-01-30 17:15:17
Also in: lkml
Subsystem: diamond systems gpio-mm gpio driver, gpio subsystem, the rest · Maintainers: William Breathitt Gray, Linus Walleij, Bartosz Golaszewski, Linus Torvalds

This patch sets the gpio_chip names option with an array of GPIO line
names that match the manual documentation for the Diamond Systems
GPIO-MM. This should make it easier for users to identify which GPIO
line corresponds to a respective GPIO pin on the device.

Signed-off-by: William Breathitt Gray <redacted>
---
 drivers/gpio/gpio-gpio-mm.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-gpio-mm.c b/drivers/gpio/gpio-gpio-mm.c
index 393c8f9cf30d..bf74cc55ab44 100644
--- a/drivers/gpio/gpio-gpio-mm.c
+++ b/drivers/gpio/gpio-gpio-mm.c
@@ -230,6 +230,18 @@ static void gpiomm_gpio_set_multiple(struct gpio_chip *chip,
 	}
 }
 
+#define GPIOMM_NGPIO 48
+static const char *gpiomm_names[GPIOMM_NGPIO] = {
+	"Port 1A0", "Port 1A1", "Port 1A2", "Port 1A3", "Port 1A4", "Port 1A5",
+	"Port 1A6", "Port 1A7", "Port 1B0", "Port 1B1", "Port 1B2", "Port 1B3",
+	"Port 1B4", "Port 1B5", "Port 1B6", "Port 1B7", "Port 1C0", "Port 1C1",
+	"Port 1C2", "Port 1C3", "Port 1C4", "Port 1C5", "Port 1C6", "Port 1C7",
+	"Port 2A0", "Port 2A1", "Port 2A2", "Port 2A3", "Port 2A4", "Port 2A5",
+	"Port 2A6", "Port 2A7", "Port 2B0", "Port 2B1", "Port 2B2", "Port 2B3",
+	"Port 2B4", "Port 2B5", "Port 2B6", "Port 2B7", "Port 2C0", "Port 2C1",
+	"Port 2C2", "Port 2C3", "Port 2C4", "Port 2C5", "Port 2C6", "Port 2C7",
+};
+
 static int gpiomm_probe(struct device *dev, unsigned int id)
 {
 	struct gpiomm_gpio *gpiommgpio;
@@ -250,7 +262,8 @@ static int gpiomm_probe(struct device *dev, unsigned int id)
 	gpiommgpio->chip.parent = dev;
 	gpiommgpio->chip.owner = THIS_MODULE;
 	gpiommgpio->chip.base = -1;
-	gpiommgpio->chip.ngpio = 48;
+	gpiommgpio->chip.ngpio = GPIOMM_NGPIO;
+	gpiommgpio->chip.names = gpiomm_names;
 	gpiommgpio->chip.get_direction = gpiomm_gpio_get_direction;
 	gpiommgpio->chip.direction_input = gpiomm_gpio_direction_input;
 	gpiommgpio->chip.direction_output = gpiomm_gpio_direction_output;
-- 
2.11.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help