Re: [PATCH v2 05/10] mfd: stmpe: use generic bit mask name
From: Lee Jones <hidden>
Date: 2016-08-04 15:05:45
Also in:
linux-arm-kernel, lkml
On Thu, 28 Apr 2016, patrice.chotard@st.com wrote:
From: Patrice Chotard <redacted> In order to prepare the ground to STMPE1600, as STMPE1600's SYS_CTRL register has the same layout as STMPE801 variant, unify STMPExxx_REG_SYS_CTRL_RESET/INT_EN/INT_HI bit masks to more generic STMPE_SYS_CTRL_RESET/INT_EN/INT_HI Signed-off-by: Patrice Chotard <redacted> --- drivers/mfd/stmpe.c | 4 ++-- drivers/mfd/stmpe.h | 6 ++---- 2 files changed, 4 insertions(+), 6 deletions(-)
Acked-by: Lee Jones <redacted>
quoted hunk ↗ jump to hunk
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index af682d0..2556463 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c@@ -1089,7 +1089,7 @@ static int stmpe_chip_init(struct stmpe *stmpe) if (stmpe->irq >= 0) { if (id == STMPE801_ID) - icr = STMPE801_REG_SYS_CTRL_INT_EN; + icr = STMPE_SYS_CTRL_INT_EN; else icr = STMPE_ICR_LSB_GIM;@@ -1103,7 +1103,7 @@ static int stmpe_chip_init(struct stmpe *stmpe) if (irq_trigger == IRQF_TRIGGER_RISING || irq_trigger == IRQF_TRIGGER_HIGH) { if (id == STMPE801_ID) - icr |= STMPE801_REG_SYS_CTRL_INT_HI; + icr |= STMPE_SYS_CTRL_INT_HI; else icr |= STMPE_ICR_LSB_HIGH; }diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h index 4ae343d..4ba1123 100644 --- a/drivers/mfd/stmpe.h +++ b/drivers/mfd/stmpe.h@@ -105,6 +105,8 @@ int stmpe_remove(struct stmpe *stmpe); #define STMPE_ICR_LSB_GIM (1 << 0) #define STMPE_SYS_CTRL_RESET (1 << 7) +#define STMPE_SYS_CTRL_INT_EN (1 << 2) +#define STMPE_SYS_CTRL_INT_HI (1 << 0) /* * STMPE801@@ -121,10 +123,6 @@ int stmpe_remove(struct stmpe *stmpe); #define STMPE801_REG_GPIO_SET_PIN 0x11 #define STMPE801_REG_GPIO_DIR 0x12 -#define STMPE801_REG_SYS_CTRL_RESET (1 << 7) -#define STMPE801_REG_SYS_CTRL_INT_EN (1 << 2) -#define STMPE801_REG_SYS_CTRL_INT_HI (1 << 0) - /* * STMPE811 */
-- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog