[RFC PATCH 01/13] drm/tegra: Clean-up if probing DPAUX fails
From: Jon Hunter <hidden>
Date: 2016-06-17 12:03:35
Also in:
dri-devel, linux-devicetree, linux-i2c, linux-tegra
Subsystem:
drm drivers, drm drivers for nvidia tegra, the rest · Maintainers:
David Airlie, Simona Vetter, Thierry Reding, Mikko Perttunen, Linus Torvalds
If the probing of the DPAUX fails, then clocks are left enabled and the DPAUX reset de-asserted. Add code to perform the necessary clean-up on probe failure by disabling clocks and asserting the reset. Signed-off-by: Jon Hunter <redacted> --- drivers/gpu/drm/tegra/dpaux.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/tegra/dpaux.c b/drivers/gpu/drm/tegra/dpaux.c
index b24a0f14821a..0874a7e5b37b 100644
--- a/drivers/gpu/drm/tegra/dpaux.c
+++ b/drivers/gpu/drm/tegra/dpaux.c@@ -321,28 +321,30 @@ static int tegra_dpaux_probe(struct platform_device *pdev) if (IS_ERR(dpaux->clk_parent)) { dev_err(&pdev->dev, "failed to get parent clock: %ld\n", PTR_ERR(dpaux->clk_parent)); - return PTR_ERR(dpaux->clk_parent); + err = PTR_ERR(dpaux->clk_parent); + goto assert_reset; } err = clk_prepare_enable(dpaux->clk_parent); if (err < 0) { dev_err(&pdev->dev, "failed to enable parent clock: %d\n", err); - return err; + goto assert_reset; } err = clk_set_rate(dpaux->clk_parent, 270000000); if (err < 0) { dev_err(&pdev->dev, "failed to set clock to 270 MHz: %d\n", err); - return err; + goto disable_parent_clk; } dpaux->vdd = devm_regulator_get(&pdev->dev, "vdd"); if (IS_ERR(dpaux->vdd)) { dev_err(&pdev->dev, "failed to get VDD supply: %ld\n", PTR_ERR(dpaux->vdd)); - return PTR_ERR(dpaux->vdd); + err = PTR_ERR(dpaux->vdd); + goto disable_parent_clk; } err = devm_request_irq(dpaux->dev, dpaux->irq, tegra_dpaux_irq, 0,
@@ -350,7 +352,7 @@ static int tegra_dpaux_probe(struct platform_device *pdev) if (err < 0) { dev_err(dpaux->dev, "failed to request IRQ#%u: %d\n", dpaux->irq, err); - return err; + goto disable_parent_clk; } disable_irq(dpaux->irq);
@@ -360,7 +362,7 @@ static int tegra_dpaux_probe(struct platform_device *pdev) err = drm_dp_aux_register(&dpaux->aux); if (err < 0) - return err; + goto disable_parent_clk; /* * Assume that by default the DPAUX/I2C pads will be used for HDMI,
@@ -393,6 +395,14 @@ static int tegra_dpaux_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dpaux); return 0; + +disable_parent_clk: + clk_disable_unprepare(dpaux->clk_parent); +assert_reset: + reset_control_assert(dpaux->rst); + clk_disable_unprepare(dpaux->clk); + + return err; } static int tegra_dpaux_remove(struct platform_device *pdev)
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html